Light commercial
Showing 298–396 of 652 results
-
Tyre changer TS 45.26DP Premium
Tyre changers with tilt tower, 26” self-centring plate with repositionable jaws, incl. plastic tool head, bead pusher device, rim width max. 16”, wheel diameter max. 45”
-
Tyre changer TS 45.26DP Premium
Tyre changers with tilt tower, 26” self-centring plate with repositionable jaws, incl. plastic tool head, bead pusher device, rim width max. 16”, wheel diameter max. 45” | Available for DACH market only
-
Tyre changer Aikido.EvoFI Premium
Leverless, automatic, incl. tubeless tyre inflation device, pneumatic bead pusher and wheel lift, passenger car, rim diameter 10 – 34″ | Red (RAL 3002) | wdk certified
-
Tyre changer Aikido.Evo Premium
Leverless, automatic, incl. pneumatic bead pusher and wheel lift, passenger car, rim diameter 10 – 34″ | Red (RAL 3002) | wdk certified
-
Tyre changer Kendo.EvoFI Premium
Leverless, automatic, incl. tubeless tyre inflation device, pneumatic bead depressor pusher and pneumatic wheel lift, passenger car, rim diameter 12 – 30″ | Red (RAL 3002) | wdk certified | Not available for DACH market
-
Tyre changer Kendo.Evo Premium
Leverless, automatic, incl. pneumatic bead depressor pusher and pneumatic wheel lift, passenger car, rim diameter 12 – 30″ | Red (RAL 3002) | wdk certified | Not available for DACH market
-
Tyre changer Kendo.EvoFI Pro
Leverless, automatic, incl. tubeless tyre inflation device and pneumatic bead depressor pusher, passenger car, rim diameter 12 – 30″ | Red (RAL 3002) | wdk certified | Not available for DACH market
-
Tyre changer Kendo.Evo Pro
Leverless, automatic, incl. pneumatic bead depressor pusher, passenger car, rim diameter 12 – 30″ | Red (RAL 3002) | wdk certified | Not available for DACH market
-
Tyre changer Kendo
Leverless, automatic, passenger car, rim diameter 12 – 30″ | Red (RAL 3002) | Not available for DACH market
-
Tyre changer Combi.24ELX
Automatic, self-centering tulip chuck, electrical motor with inverter-controlled speed, passenger car, rim diameter 12 – 24″, max. rim width 15″ | Red (RAL 3002) | for all tyre types with max. wheel diameter 45″ (1143 mm) | Not available for DACH market
-
Tyre changer Classic.24ELX
Automatic, self-centering tulip chuck, electrical motor, passenger car, rim diameter 12 – 24″, max. rim width 15″ | Red (RAL 3002) | for all tyre types with max. wheel diameter 47″ (1194 mm) | Not available for DACH market
-
Tyre changer HP643SD.26 Premium
Mounting head and mounting lever, automatic, chucking table with double adjustable clamp position, incl. pneumatic bead depressor pusher and plastic protection for ALU rims, passenger car, rim diameter 10 – 28.5″, max. rim width 15″ | Red (RAL 3002) | for all tyre types with max. wheel diameter 45″ (1143 mm) | wdk certified
-
Tyre changer HP643SD.26FI Pro
Mounting head and mounting lever, automatic, incl. tubeless tyre inflation device, pneumatic bead depressor pusher and plastic protection for ALU rims, passenger car, rim diameter 10 – 28.5″, max. rim width 15″ | Red (RAL 3002) | for all tyre types with max. wheel diameter 45″ (1143 mm) | wdk certified
-
Tyre changer HP643SD.26 Pro
Mounting head and mounting lever, automatic, incl. pneumatic bead depressor pusher and plastic protection for ALU rims, passenger car, rim diameter 10 – 28.5″, max. rim width 15″ | Red (RAL 3002) | for all tyre types with max. wheel diameter 45″ (1143 mm) | wdk certified
-
Tyre changer HP641SD.24 Pro
Mounting head and mounting lever, automatic, square standard chucking table, incl. pneumatic bead depressor pusher and plastic protection for ALU rims, passenger car, rim diameter 10 – 26.5″, max. rim width 15″ | Red (RAL 3002) | for all tyre types with max. wheel diameter 43″ (1092 mm) | wdk certified
-
Tyre changer HP641SD.24FI
Mounting head and mounting lever, automatic, square standard chucking table, incl. tubeless tyre inflation device and plastic protection for ALU rims, passenger car, rim diameter 10 – 26.5″, max. rim width 15″ | Red (RAL 3002) | for all tyre types with max. wheel diameter 43″ (1092 mm)
-
Tyre changer HP641SD.24
Mounting head and mounting lever, automatic, square standard chucking table, incl. plastic protection for ALU rims, passenger car, rim diameter 10 – 26.5″, max. rim width 15″ | Red (RAL 3002) | for all tyre types with max. wheel diameter 43″ (1092 mm)
-
Tyre changer HP641SQ.22 Premium
Mounting head and mounting lever, automatic, square standard chucking table, incl. tubeless tyre inflation device, pneumatic bead depressor pusher and plastic protection for ALU rims, passenger car, rim diameter 10 – 24.5″, max. rim width 12″ | Red (RAL 3002) | for all tyre types with max. wheel diameter 41″ (1050 mm) | wdk certified
-
Tyre changer HP641SQ.22FI
Mounting head and mounting lever, automatic, square standard chucking table, incl. tubeless tyre inflation device and plastic protection for ALU rims, passenger car, rim diameter 10 – 24.5″, max. rim width 12″ | Red (RAL 3002) | for all tyre types with max. wheel diameter 41″ (1050 mm)
-
Tyre changer HP641SQ.22
Mounting head and mounting lever, automatic, square standard chucking table, incl. plastic protection for ALU rims, passenger car, rim diameter 10 – 24.5″, max. rim width 12″ | Red (RAL 3002) | for all tyre types with max. wheel diameter 41″ (1050 mm)
-
Tyre changer HP441SQ.22
Mounting head and mounting lever, automatic, square standard chucking table, incl. plastic protection for ALU rims, passenger car, rim diameter 10 – 24.5″, max. rim width 12″ | Red (RAL 3002) | for all tyre types with max. wheel diameter 41″ (1050 mm)
-
Electronic monitor wheel balancer Librak C1 WS
22” full HD LCD monitor with integrated key board, industrial pc, incl. cones for cars, wheel hood and professional quick nut, laser line and led lighting, rim diameter 10 – 30/33″ (automatic/manual) | Red (RAL 3002)
-
Electronic monitor wheel balancer Librak C1 PWS
2” full HD LCD monitor with integrated key board, industrial pc, incl. cones for cars, wheel hood, with pneumatic spindle, laser line and led lighting, rim diameter 10 – 30/33″ (automatic/manual) | Red (RAL 3002)
-
Electronic monitor wheel balancer Librak C1 PWS Pro
2” full HD LCD monitor with integrated key board, industrial pc, complete with GAR112 and GAR375, incl. cones for cars, wheel hood, with pneumatic spindle, laser line and led lighting, rim diameter 10 – 30/33″ (automatic/manual) | Red (RAL 3002)
-
Electronic wheel balancer with microprocessor Librak350LWS (grey)
3D with sonar, 22″ LCD monitor, passenger car and van, rim diameter 10 – 26″, max. wheel capacity 43″ | Grey (RAL 7016)
-
Electronic wheel balancer with microprocessor Librak350L (grey)
2D, 22″ LCD monitor, passenger car and van, rim diameter 10 – 26″, max. wheel capacity 43″ | Grey (RAL 7016)
-
Lifting table MGE 2.0
2.0 t, 1000 mm stroke, air hydraulic pump | Grey (RAL 7015)
-
Electronic monitor wheel balancer Librak360PWS Pro
22” full HD LCD monitor, industrial PC, incl. cones for cars and SUVs, wheel hood, tape-weight roller support and centering bush, passenger car, rim diameter 10 – 30/33″ (automatic/manual) | Red (RAL 3002)
-
Electronic monitor wheel balancer Librak360PWS
22” full HD LCD monitor, industrial PC, incl. cones for cars, wheel hood and centering bush, passenger car, rim diameter 10 – 30/33″ (automatic/manual) | Red (RAL 3002)
-
Axial traverse ATB NF
10 t, peg Ø 55 mm, adjustment range 420 – 1020 mm | suitable for low-level buses | incl. 2 sliders and 2 adjustable receptacle pins
-
Axial traverse ATEB
10 t, peg Ø 55 mm
-
Axial traverse ATEB S2
7.5 – 15 t, peg Ø 45 mm
-
Axial traverse ATEB S2
7.5/15 t, peg Ø 45/55 mm, adjustment range 200 – 620/830 – 1500 mm | special cross bar for secure seating of EvoBus buses, in particular the CITARO series | incl. 4 pads and 2 sliders
-
Axial traverse ATH
1.5 t, peg Ø 35 mm, adjustment range 550 – 1200 mm, 1-fold telescopic | incl. 2 pads and 2 spacers
-
Axial traverse ATT 3,2
3.2 t, peg Ø 35 mm, adjustment range 630 – 1230 mm, 2-fold telescopic, incl. carrying plates | safe 2-point-support of vehicles such as Mercedes-Benz Sprinter, VW – LT 2
-
Axial traverse ATT 3.2 C
3.2 t, peg Ø 55 mm, adjustment range 868 – 1660 mm, 2-fold telescopic | for passenger cars and vans | incl. pad
-
Bus traverse BEFV-15
Wide, extended version with extendable sliding pieces, extra flat, adjustment range 870 – 1200 mm (510 – 840 mm), load capacity 15 t (center) | 1 piece
-
Bushing 55/35
Peg Ø 55 mm, standard peg Ø gearbox plates 35 mm | for BLITZlifts with mount Ø 55 mm | 1 piece
-
Bushing 55/45
Peg Ø 55 mm, standard peg Ø gearbox plates 45 mm | for BLITZlifts with mount Ø 55 mm | 1 piece
-
Bushing 80/35
Peg Ø 80 mm, standard peg Ø gearbox plates 35 mm | for BLITZlifts with mount Ø 80 mm | 1 piece
-
Bushing 80/45
Peg Ø 80 mm, standard peg Ø gearbox plates 45 mm | for BLITZlifts with mount Ø 80 mm | 1 piece
-
Connecting pieces ZS 100
1.5 t, 100 mm | 1 set / 2 pieces
-
Connecting pieces ZS 50
1.5 t, 50 mm | 1 set / 2 pieces
-
Electronic monitor wheel balancer Librak360WS
22” full HD LCD monitor, industrial PC, incl. cones for cars, wheel hood and professional quick nut, passenger car, rim diameter 10 – 30/33″ (automatic/manual) | Red (RAL 3002)
-
Fastening set ATS
30 t, peg Ø 55 mm | for positioning a traverse safely on the supporting bridge GS
-
Fastening set ATS
10 t, peg Ø 35 mm | for positioning a traverse safely on the supporting bridge GS
-
Fastening set ATT 3,2
10 t, peg Ø 35 mm | for secure placement of an axial traverse ATT 3,2 on the supporting bridge GS / GSB
-
Gearbox plate GA III
Adjustment angle +/- 40° / +/- 17°, load capacity 1 t, peg Ø 35 mm, measurements 400 x 300 mm (adjustable up to 600 x 400 mm), tensioning belt to secure the load
-
Gearbox plate GA IV
Adjustment angle +/- 12°, load capacity 1 t, peg Ø 35 mm, measurements 546 x 381 mm, in series galvanised, tensioning belts to secure the load, large rubber supporting surface
-
Lowered traverse
Can travel along the whole adjusting range at floor level
-
Lowered traverse
In defined position, fitted at floor level
-
Mounting set for traverse ATT 3,2 C
Optional accessories for the transporter receptacle, recommended plug-in pick-up set | for cars / vans / MAN / Crafter / Sprinter
-
Pad A 120
Support plate, pin | load capacity 15 t, peg Ø 75 mm, Ø 120 mm | with handles | 1 piece
-
Pad A 50
Support plate, pin | load capacity 15 t, peg Ø 75 mm, Ø 50 mm | 1 piece
-
Pad A 60
Support plate, pin | load capacity 15 t, peg Ø 75 mm, Ø 60 mm | 1 piece
-
Pad E 140/100
Support plate, aluminum pad, rectangular | load capacity 15 t, peg Ø 75 mm | 1 piece
-
Pad E 190/230
Support plate, aluminum pad, rectangular | load capacity 15 t, peg Ø 75 mm | for traverse TEF 107445 | 1 piece
-
Pad E 270/230
Support plate, aluminum pad, rectangular | load capacity 15 t, peg Ø 75 mm | for traverse TEFV 11132 | 1 piece
-
Pad G 145/150
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
-
Pad G 185/150
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
-
Pad G 220/110
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
-
Pad G 260/190
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
-
Pad G 30/80
Supporting fork | load capacity 15 t, peg Ø 75 mm | 1 piece
-
Pad G 40/150
Supporting fork, standard | load capacity 15 t, peg Ø 75 mm | 1 piece
-
Pad G 40/90
Supporting fork | load capacity 15 t, peg Ø 75 mm | for supporting low-floor buses (MAN and DB CITARO) at the front axle | 1 piece
-
Pad G 50/60
Supporting fork | load capacity 15 t, peg Ø 75 mm | 1 piece
-
Pad H
Wooden clamp | load capacity 15 t, peg Ø 35 mm | 1 piece
-
Pad H
Wooden clamp | load capacity 20 t, peg Ø 80 mm | 1 piece
-
Pad H
Wooden clamp | load capacity 20 t, peg Ø 55 mm | 1 piece
-
Pad P
Support plate, pin | load capacity 15 t, peg Ø 35 mm | special support for buses on frame (mushroom shaped support) | 1 piece
-
Pad P MAN
Support plate, pin | load capacity 15 t, peg Ø 35 mm | special support for MAN trucks at the rear axle (mushroom shaped support) | 1 piece
-
Pad R
Support plate, rubber pad, round | load capacity 15 t, peg Ø 35 mm | 1 piece
-
Pad R 116
Support plate, rubber pad, round | load capacity 15 t, peg Ø 75 mm, Ø 116 mm | 1 piece
-
Pad R 150
Support plate, rubber pad, round | load capacity 15 t, peg Ø 75 mm, Ø 150 mm | 1 piece
-
Pad U
Support plate, fork | load capacity 15 t, peg Ø 55 mm | 1 piece
-
Pad U
Support plate, fork | load capacity 15 t, peg Ø 35 mm | 1 piece
-
Pad U 145
Support plate, fork | load capacity 15 t, peg Ø 35 mm | 1 piece
-
Pad U 175
Support plate, fork | load capacity 15 t, peg Ø 35 mm | 1 piece
-
Pad U 220
Support plate, fork | load capacity 15 t, peg Ø 35 mm | 1 piece
-
Pad X
Steel clamp | load capacity 30 t, peg Ø 80 mm | 1 piece
-
Pad X
Steel clamp | load capacity 20 t, peg Ø 55 mm | 1 piece
-
Pad X
Steel clamp | load capacity 15 t, peg Ø 35 mm | 1 piece
-
Pads
Support plate, rubber pad, rectangular | for Tesla | 1 set / 4 pieces
-
Pads
Prism | for Mercedes G-Class – front and rear | 1 set / 4 pieces
-
Pads
Mandrel | for Fiat Ducato, Peugeot Boxer, Citroën Jumper – front and rear | 1 set / 4 pieces
-
Pads
Prism, mandrel | for Mercedes Sprinter, VW Crafter | 1 set / 6 pieces
-
Pads
Support plate, U-support | 1 set / 4 pieces
-
Pads
Prism | for VW MEB platform E-vehicles | 1 set / 4 piece
-
Pads
Support plate, centering mushroom | for Fiat 500E, 500 ABARTH | 2-stage | 1 set / 4 pieces
-
Pit expansion BusStop
Abstract segment
-
Pit frame Type A
weight: 46 kg/m, a = 870 mm, per meter
-
Pit frame Type A
weight: 46 kg/m, a = 870 mm, per meter
-
Pit frame Type B
weight: 55Kg/m, a = 940 mm, per meter
-
Pit frame Type B
weight: 55 kg/m, a = 940 mm, per meter
-
Pit frame Type B1
weight: 42 kg/m, a = 940 mm, per meter
-
Pit frame Type B1
weight: 42 kg/m, a = 940 mm, per meter
-
Pit frame Type E
weight: 82 kg/m, a = 940 mm, per meter
-
Pit frame Type E
weight: 82 kg/m, a = 940 mm, per meter
-
Pit frame Type E1
weight: 69 kg/m, a = 940 mm, per meter