Light commercial
Showing 397–495 of 652 results
-
Pit frame Type E1
weight: 69 kg/m, a = 940 mm, per meter
-
Pit frame Type F
weight: 71.4 kg/m, a = 940 mm, per meter
-
Pit frame Type F
weight: 71.4 kg/m, a = 940 mm, per meter
-
Pit frame Type F1
weight: 62.5 kg/m, a = 940 mm, per meter, galvanised (both side)
-
Pit frame Type F1
weight: 62.5 kg/m, a = 940 mm, per meter, primecoated (both side)
-
Prismatic blocks
For GA IV | 2 pieces
-
Segment Pit Covering
for monolithic constructed pits, per meter
-
Spacer D 100
15 t, peg Ø 75 mm, 100 mm | 1 piece
-
Spacer D 200
15 t, peg Ø 75 mm, 200 mm | 1 piece
-
Spacer D 60
15 t, peg Ø 75 mm, 60 mm | 1 piece
-
Spacer DS 1
15 t, peg Ø 35 mm, 100 mm | 1 piece
-
Spacer DS 1
30 t, peg Ø 55 mm, 100 mm | 1 piece
-
Spacer DS 2
15 t, peg Ø 35 mm, 150 mm | 1 piece
-
Spacer DS 2
30 t, peg Ø 80 mm, 150 mm | 1 piece
-
Spacer DS 2
30 t, peg Ø 55 mm, 150 mm | 1 piece
-
Spacer DS 3
15 t, peg Ø 35 mm, 250 mm | 1 piece
-
Spacer DS 3
30 t, peg Ø 55 mm, 250 mm | 1 piece
-
Spacer DS 3
30 t, peg Ø 80 mm, 250 mm | 1 piece
-
Spacer tube DR 4
10 t, peg Ø 35 mm, 400 mm | 1 piece
-
Spacer tube DR 4
15 – 20 t, peg Ø 55 mm, 400 mm | 1 piece
-
Spacer tube DR 5
15 – 30 t, peg Ø 55 mm, 500 mm | 1 piece
-
Spacer tube DR 6
10 t, peg Ø 35 mm, 600 mm | 1 piece
-
Spacer tube DR 6
30 t, peg Ø 80 mm, 600 mm | 1 piece
-
Support platform
15 t, mobile | for use in conjunction with U-brackets, primed and lacquered, lowered under load
-
Supporting block DB
Wooden block, 100 x 200 x 360 mm, load capacity 15 t | for lowering the traverse onto the supporting bridge | 1 piece
-
Supporting bridge GS 10
10 t | Universal | to ensure that the vehicle is tilt-proof – pit lift can still be used | incl. roller set, 2 sliders, 2 spacer tubes, 2 pads, traverses and tool tray
-
Supporting bridge GS 15
15 t | Universal | to ensure that the vehicle is tilt-proof – pit lift can still be used | incl. roller set, 2 sliders, 2 spacer tubes, 2 pads, traverses and tool tray
-
Supporting bridge GS 20
20 t | Universal | to ensure that the vehicle is tilt-proof – pit lift can still be used | incl. roller set, 2 sliders, 2 spacer tubes, 2 pads, traverses and tool tray
-
Supporting bridge GS 30
30 t | Universal | to ensure that the vehicle is tilt-proof – pit lift can still be used | incl. roller set, 2 sliders, 2 spacer tubes, 2 pads, traverses and tool tray
-
Supporting bridge GSB
10 t | super flat, accessible for low-floor buses | incl. roller set, 2 sliders, 2 spacer tubes and 2 pads
-
Supporting bridge GSB
15 t | super flat, accessible for low-floor buses | incl. roller set, 2 sliders, 2 spacer tubes and 2 pads
-
Supporting bridge GSB Vario
15 t | super flat, accessible for low-floor buses | incl. roller set, 2 sliders, 2 spacer tubes and 2 pads
-
Supporting bridge GSV
15 t, adjustable 900 – 1180 mm | pit lift can still be used | incl. roller set, 2 sliders, 2 spacer tubes, 2 pads and tool tray
-
Supporting bridge SPZ-15
-
Supporting Package I
10 t, peg Ø 55 mm, navigable
-
Supporting Package I
15 t, peg Ø 55 mm, movable | minimum equipment of a working pit | incl. supporting bridge GS, traverse ATS, 2 spacers and connecting set
-
Supporting Package I
20 t, peg Ø 55 mm, navigable
-
Supporting Package I
30 t, peg Ø 80 mm, navigable
-
Supporting Package I
20 t, peg Ø 80 mm, navigable
-
Supporting Package II
11 t, peg Ø 55 mm, navigable
-
Supporting Package II
20 t, peg Ø 55 mm. navigable
-
Supporting Package II
20 t, peg Ø 80 mm, navigable
-
Supporting Package II
30 t, peg Ø 80 mm, navigable
-
Supporting Package II
15 t, peg Ø 55 mm, movable | basic equipment for lorry workshops with universal vehicle access | incl. 2 supporting bridges GS, 2 traverses (ATS, ATK), 2 spacers, connecting set and 2 spacer tubes
-
Supporting Package III
15 t, peg Ø 55 mm, movable | for bus and transport companies (low-floor buses) | incl. supporting bridge GSB, traverse ATB, 3 pads and 2 wooden blocks
-
Supporting Package III
10 t, peg Ø 55 mm, navigable
-
Supporting Package IV
10 t, peg Ø 55 mm, navigable
-
Supporting Package IV
15 t, peg Ø 55 mm, movable | for repair shops with universal vehicle access – specialising in trucks, Unimogs, construction and specialised vehicles | incl. 3 traverses (ATK, ATS, ATB), 3 supporting bridges GS, 2 wooden blocks, 5 pads, 2 spacer tubes and 8 spacers
-
Supporting Package IV
20 t, peg Ø 55 mm, navigable
-
Supporting Package IV
20 t, peg Ø 80 mm, navigable
-
Supporting Package IV
30 t, peg Ø 80 mm, navigable
-
Transport trolley for traverse TS
-
Traverse ATB
10 t, peg Ø 55 mm
-
Traverse ATB
15 t, peg Ø 55 mm | standard traverse for buses, incl. 2 sliders and 4 pads
-
Traverse ATB N
10 t, peg Ø 55 mm
-
Traverse ATK
10 t, peg Ø 55 mm | front axle fork, incl. 2 pads
-
Traverse ATK
30 t, peg Ø 80 mm
-
Traverse ATK
20 t, peg Ø 55 mm | front axle fork, incl. 2 pads
-
Traverse ATK
20 t, peg Ø 55 mm | front axle fork, incl. 2 pads
-
Traverse ATK
15 t, peg Ø 55 mm | front axle fork, incl. 2 pads
-
Traverse ATS
20 t, peg Ø 55 mm
-
Traverse ATS
10 t, peg Ø 55 mm
-
Traverse ATS
30 t, peg Ø 80 mm
-
Traverse ATS
20 t, peg Ø 80 mm
-
Traverse ATS 15
15 t, peg Ø 55 mm | standard traverse for trucks | incl. 2 sliders, 2 pads and 2 spacers
-
Traverse set ATB
15 t, peg Ø 55 mm | accessories for supporting trucks | incl. 2 sliders, 2 pads and 2 spacers
-
Traverse set ATB | 10 t
10 t, peg Ø 35 mm | accessory set for supporting trucks | incl. 2 sliders, 2 pads and 2 spacers
-
Traverse set ATB MAN TGA
15 t, peg Ø 55 mm | accessories for supporting MAN trucks at the axles | incl. connecting set, 4 pads and 4 spacers
-
Traverse set TP
Especially suitable for the reception of downhill tracks
-
Traverse T
-
Traverse TA
-
Traverse TS
2180 x 203 mm | special traverse complete
-
Truck traverse TEF-15 | Universal
1 piece, 1-fold telescopic, adjustment range 710 – 1040 mm (510 – 840 mm), load capacity 15 t (center)
-
Truck traverse TTS-15 | Double extension
15 t (center), 2-fold telescopic, adjustment range 880 – 1500 mm (520 – 1140 mm)
-
Water drain/filter combination
Water separator, fitted in factory | to protect the control system and pump from harmful condensation | max. operating pressure 16 bar
-
Electronic wheel balancer with microprocessor Librak350LPWS
3D with sonar, 22″ LCD monitor, pneumatic locking, passenger car and van, rim diameter 10 – 26″, max. wheel capacity 43″ | Red (RAL 3002)
-
Electronic wheel balancer with microprocessor Librak350LWS
3D with sonar, 22″ LCD monitor, passenger car and van, rim diameter 10 – 26″, max. wheel capacity 43″ | Red (RAL 3002)
-
Electronic wheel balancer with microprocessor Librak350L
2D, 22″ LCD monitor, passenger car and van, rim diameter 10 – 26″, max. wheel capacity 43″ | Red (RAL 3002)
-
Electronic digital wheel balancer Librak345WS
3D with sonar, backlit LCD graphic display (132 x 40 mm), passenger car and van, rim diameter 10 – 26″, max. wheel capacity 43″ | Red (RAL 3002)
-
Electronic digital wheel balancer Librak345
2D, backlit LCD graphic display (132 x 40 mm), passenger car and van, rim diameter 10 – 26″, max. wheel capacity 43″ | Red (RAL 3002)
-
Electronic monitor wheel balancer Librak350 Pro
22” full HD LCD monitor, industrial PC, incl. cones for cars and SUVs, wheel hood and professional quick nut, passenger car, rim diameter 10 – 26″ | Red (RAL 3002)
-
Electronic monitor wheel balancer LIBRAK350
22” full HD LCD monitor, industrial PC, automatic cycle, measuring arm for automatic wheel width and rim diameter measuring, incl. cones for cars, wheel hood and professional quick nut, passenger car, rim diameter 10 – 26/30″(automatic/manual) | Red (RAL 3002)
-
3D wheel aligner SPEED32P HPR.3
3D wheel aligner with wireless HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 3-point clamps, 27″ TFT display, closed cabinet, wide turntables and extra batteries | compatible with con ADAS | Red (RAL 3002)
-
3D wheel aligner SPEED32P HPR.3
3D wheel aligner with wireless HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 3-point clamps, 27″ TFT display, closed cabinet, wide turntables and extra batteries | compatible with con ADAS | Grey (RAL 7040)
-
3D wheel aligner SPEED32P HP.3
3D wheel aligner with wireless HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 3-point clamps, 27″ TFT display, closed cabinet and wide turntables | Red (RAL 3002)
-
3D wheel aligner SPEED32P SP.3
3D wheel aligner with wireless HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 3-point clamps, 22″ TFT display, closed cabinet and turntables | Red (RAL 3002)
-
3D wheel aligner SPEED32P SP.4
3D wheel aligner with wireless HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 4-point clamps, 22″ TFT display, closed cabinet and turntables | Red (RAL 3002)
-
3D wheel aligner SPEED32 L.3
3D wheel aligner with wireless HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 3-point clamps, 22″ TFT display, open cabinet and turntables | Grey (RAL 7040)
-
3D wheel aligner SPEED32 L.4
3D wheel aligner with wireless HQ 3D measuring heads and Bluetooth data communication | incl. self-centering 4-point clamps, 22″ TFT display, open cabinet and turntables | Grey (RAL 7040)
-
CCD wheel aligner SPEED8050PWS.3
8 CCD wheel aligner | incl. 3-point wheel clamps, closed cabinet, turntables and 24″ LCD display | Red (RAL 3002) | 1 x 230 V / 50 – 60 Hz
-
CCD wheel aligner SPEED8050PWS.3 (grey)
8 CCD wheel aligner | incl. 3-point wheel clamps, closed cabinet, turntables and 24″ LCD display | Grey (RAL 7040) | 1 x 230 V / 50 – 60 Hz
-
CCD wheel aligner SPEED7080PWS.3
8 CCD wheel aligner | incl. 3-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Red (RAL 3002) | 1 x 230 V / 50 – 60 Hz
-
CCD wheel aligner SPEED7080PWS.3 (grey)
8 CCD wheel aligner | incl. 3-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Grey (RAL 7040) | 1 x 230 V / 50 – 60 Hz
-
CCD wheel aligner SPEED7080PWS.4
8 CCD wheel aligner | incl. 4-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Red (RAL 3002) | 1 x 230 V / 50 – 60 Hz
-
CCD wheel aligner SPEED7080PWS.4 (grey)
8 CCD wheel aligner | incl. 4-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Grey (RAL 7040) | 1 x 230 V / 50 – 60 Hz
-
CCD wheel aligner SPEED7060PWS.3
6 CCD wheel aligner | incl. 3-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Red (RAL 3002) | 1 x 230 V / 50 – 60 Hz
-
CCD wheel aligner SPEED7060PWS.4
6 CCD wheel aligner | incl. 4-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Red (RAL 3002) | 1 x 230 V / 50 – 60 Hz
-
CCD wheel aligner SPEED7060PWS.4
6 CCD wheel aligner | incl. 4-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Red (RAL 3002) | 1 x 230 V / 50 – 60 Hz
-
CCD wheel aligner SPEED7060PWS.3 (grey)
6 CCD wheel aligner | incl. 3-point wheel clamps, closed cabinet, turntables and 22″ LCD display | Grey (RAL 7040) | 1 x 230 V / 50 – 60 Hz