Trucks
Showing 100–198 of 495 results
Spacer DS 3
30 t, 55 mm peg diameter
Support plate H
20 t, 80 mm peg diameter
Support plate H
20 t, 55 mm peg diameter
Supporting bridge GS
Universal, capacity 20 t, with Rollerset
Supporting Package I
20 t, 55 mm peg diameter, navigable
Supporting Package I
20 t, 80 mm peg diameter, navigable
Supporting Package II
20 t, 55 mm peg diameter. navigable
Supporting Package II
20 t, 80 mm peg diameter, navigable
Supporting Package IV
20 t, 55 mm peg diameter, navigable
Supporting Package IV
20 t, 80 mm peg diameter, navigable
Traverse ATK
20 t, 55 mm peg diameter
Traverse ATK
20 t, 80 mm peg diameter
LED lighting kit 2 standard
for 2 wheel lifts
Access ramps 3300 mm
(ideal for low-floor vehicles), 1 pair
Transport trolley SmartCart XS | for Duplex load-carrying equipment
The convenient workshop helper with 33 slots – the attachments find their place in a tidy manner
Access ramps 2510 mm | galvanized
drive over (above-ground version), 1 pair
Access ramps 3300 mm | galvanized
(ideal for low-floor vehicles), 1 pair
Bus traverse BEFV-15
Wide, extended version with extendable sliding pieces, extra flat, adjustment range 870 – 1200 mm (510 – 840 mm), load capacity 15 t (center) | 1 piece
MRG-Kit for MRG-55
10m power cable with plug and 1 liter spindle oil
Truck traverse TEF-15 | Universal
1 piece, 1-fold telescopic, adjustment range 710 – 1040 mm (510 – 840 mm), load capacity 15 t (center)
Truck traverse TTS-15 | Double extension
1 piece, 2-fold telescopic, adjustment range 880 – 1500 mm (520 – 1140 mm), load capacity 15 t (center)
Wheel clamps Fast clamps
Quick-clamps | for 3D wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, clamps weight 3.5 kg (per set) | 1 set / 2 pieces
Traverse ATB NF
10 t, 55 mm peg diameter
MRG-Kit for MRG-25
10m power cable with plug and 1 liter spindle oil
Supporting bridge GS
Universal, capacity 10 t, with Rollerset
Supporting bridge GSB
Extra flat, capacity 10 t, with Rollerset
Supporting bridge VS
Connecting set, capacity 10 t
Supporting Package I
10 t, 55 mm peg diameter, navigable
Supporting Package II
11 t, 55 mm peg diameter, navigable
Supporting Package III
10 t, 55 mm peg diameter, navigable
Traverse ATB
10 t, 55 mm peg diameter
Traverse ATB Truck-Set
10 t, 35 mm peg diameter
Traverse ATK
10 t, 55 mm peg diameter
Traverse ATS
10 t, 55 mm peg diameter
Supporting Package IV
10 t, 55 mm peg diameter, navigable
Lowered traverse
Can travel along the whole adjusting range at floor level
Lowered traverse
In defined position, fitted at floor level
Spacer D 100
Height 100 mm
Spacer D 200
Height 200 mm
Spacer D 60
Height 60 mm
Standard acceptance G 145/150
Standard acceptance G 185/150
Standard acceptance G 220/110
Standard acceptance G 260/190
for rear axles with differential
Standard acceptance G 30/80
Standard acceptance G 40/150
Standard acceptance G 40/90
Standard acceptance G 50/60
Support plate A 120
Support plate A 50
Support plate A 60
Support plate E 140/100
Support plate E 190/230
Support plate E 270/230
Support plate R 116
Support plate R 150
Traverse ATB N
10 t, 55 mm peg diameter
Traverse ATEB
10 t, 55 mm peg diameter
Traverse T
Traverse TA
Traverse TP
Traverse TS special traverse cpl.
Traverse TS trolley
Support plate X
30 t, 80 mm peg diameter
Supporting bridge GS
Universal, capacity 30 t, with Rollerset
Supporting Package I
30 t, 80 mm peg diameter, navigable
Supporting Package II
30 t, 80 mm peg diameter, navigable
Supporting Package IV
30 t, 80 mm peg diameter, navigable
Traverse ATK
30 t, 80 mm peg diameter
Traverse ATS
30 t, 80 mm peg diameter
Accessories holder
Connection Kit VS ATT 3,2
For secure placement of an axle load ATT 3,2 on the support bridge GS / GSB
Frame
For central load
Pad
Steel
Roller
Ø 75 mm, adjustable for light transmission
Roller
Ø 59,5 mm, adjustable for light transmission
Spacer
Adaption for flywheel cDISK
Positive fit by means of hexagon bolts, diameter: 450 mm, yellow chromated, weight: 1.5 kg, load bearing capacity: 80 kg, additional pitch circle diameter 410 mm + 375 mm
Adjustable drive
Additional adjustable drive to mobilise the fixed lifting unit, incl. extended hanging control pad, reversing device, chain and cover
Automatic ”run-into” protection
Light barrier max.15 m
Automatic ”run-into” protection
Position indicator for craneway
Automatic ”run-into” protection
Mount for automatic ”run-into” protection according to requirements
Automatic axle distance preselection
AAV-Control
C-clip cDISK
For the installation and removal of couplings and control disks in a restricted installation space,rn(E.g. Cross-linking, connection only with basic device cDISK 3745410) capacity 80 kg
Cable suspension
For electric or compressed air cables, especially suitable for installation in pits with overhang | Sold by the meter, installation by the customer
Cable suspension
Balancer to disconnect hand-held control panel
Cable suspension
Mount for running rail according to requirements
Cassette extended (primary coated)
Incl. galvanized slide covering, per meter
Cassette extended (primary coated)
Incl. FLEXCOVER, per meter
Cassette galvanized
Instead of primary coat, per meter
Die cast housing cDISK
yellow-chromatised, weight: 6 kg, capacity: 80 kg
EvoBus Extra kit for pressure plate cDISK
yellow-chromatised, capacity: 80 kg
Floor stand
800 mm wide (for T/L-4 platform)
Floor stand
1000 mm wide (for T/L-5 platform)
Frame extended (primary copated)
Incl. galvanised slide covering, per meter
Frame extended (primary copated)
Incl. FLEXCOVER, per meter
Frame galvanized
Instead of primary coat, per meter
Frame with overhang
incl. galvanised slide covering, each piece
Frame with overhang
galvanised execution, incl. galvanised slide covering, each piece