Passenger cars
Showing 1–99 of 542 results
-
Adaption A12-1
for A-Class from approx. 3/2001 (2 pieces)
-
Adaption C01
for C-Class (BR203)
-
Aggregate plate with supporting arms GA P (Porsche)
A particularly versatile aggregate plate for the removal and installation of engines, transmissions, axles, exhaust systems, etc.
-
Bushing 55/45
Peg diameter = 55 mm, standard Peg Ø of the axle traverse = 45 mm, with collar
-
Bushing 80/45
Peg diameter = 80 mm, standard Peg Ø of the axle traverse = 45 mm
-
Calibration fee (net) for all tyre gauges Pneutruck
-
Lift Safety Device A50
for A-Class
-
Nuts wear check-tool
-
Pit expansion BusStop
Abstract segment
-
Pit frame Type A
weight: 46 kg/m, a = 870 mm, per meter
-
Pit frame Type A
weight: 46 kg/m, a = 870 mm, per meter
-
Pit frame Type B
weight: 55Kg/m, a = 940 mm, per meter
-
Pit frame Type B
weight: 55 kg/m, a = 940 mm, per meter
-
Pit frame Type B1
weight: 42 kg/m, a = 940 mm, per meter
-
Pit frame Type B1
weight: 42 kg/m, a = 940 mm, per meter
-
Pit frame Type E
weight: 82 kg/m, a = 940 mm, per meter
-
Pit frame Type E
weight: 82 kg/m, a = 940 mm, per meter
-
Pit frame Type E1
weight: 69 kg/m, a = 940 mm, per meter
-
Pit frame Type E1
weight: 69 kg/m, a = 940 mm, per meter
-
Pit frame Type F
weight: 71.4 kg/m, a = 940 mm, per meter
-
Pit frame Type F
weight: 71.4 kg/m, a = 940 mm, per meter
-
Pit frame Type F1
weight: 62.5 kg/m, a = 940 mm, per meter
-
Pit frame Type F1
weight: 62.5 kg/m, a = 940 mm, per meter
-
Removal device A12
for integral mounting bracket with support frame (A-Class)
-
Segment Pit Covering
for monolithic constructed pits, per meter
-
Spacer DR 4
Height 400 mm, capacity 10 trnSpacer tubes to compensate for particularly large height differences between support bridges and load, with fall-through protection as standard, per piece
-
Spacer DR 4
-
Spacer DR 6
Height 600 mm, capacity 10 t
-
Strutting for deposition bay
-
Surcharge for rail chassis with lateral flanged rollers (set consisting of 4 pieces)
-
Water drain/filter combination for Portal Lift 17 Vario
Water separator, fitted in factory | to protect the control system and pump from harmful condensation | max. operating pressure 16 bar
-
Width extension
For 2-post lift KPX35LLE | enables columns to be widened up to 3200 mm
-
2-post lift SPOA40AV-EH1
4.0 t, electrohydraulic, AV arms, symmetrical posts, 3-stage long arms, 3-stage short arms
-
2-post lift SPOA40AV-EH2
4.0 t, electrohydraulic, AV arms, symmetrical posts, 3-stage long arms, 3-stage short arms
-
2-post lift SPOA3TM-5-EH1
3.5 t, electrohydraulic, manual operation, 3-sectional support arms in front x 4, asymmetrical, total height 3865 mm
-
2-post lift TLO7
Ideal to lift garden machinery, golf carts and mini tractors: 1.1 – 2.3 t, for 3-wheel (1100 kg) and 4-wheel (2300 kg) turf equipment, electro – hydraulic, asymmetrical, total height 4166 mm
-
2-post lift SPOA3TM-5-EH2
3.5 t, electrohydraulic, manual operation, 3-sectional support arms in front x 4, asymmetrical, total height 4170 mm
-
2-post lift SPOA3TS-5-EH1
3.5 t, electrohydraulic, push-button operation, 3-sectional support arms in front, asymmetrical, total height 3865 mm
-
2-post lift SPOA3TS-5-EH2
3.5 t, electrohydraulic, push-button operation, 3-sectional support arms in front, asymmetrical, total height 4170 mm
-
2-post lift SPOA3TS-5SC-EH1
3.5 t, electrohydraulic, push-button operation, 3-sectional support arms in front, asymmetrical, total height 3775 mm
-
2-post lift SPOA3TS-5SC-EH2
3.5 t, electrohydraulic, push-button operation, 3-sectional support arms in front, asymmetrical, total height 4080 mm
-
2-post lift SPOA3TS-EH2-EV
3.5 t, electrohydraulic, EV arms
-
2-post lift SPOA3LX
3.5 t, electrohydraulic, double control panel, asymmetrical support arms, height of column 2908 mm
-
2-post lift SGL35M 400 V – 3 Ph – 50 Hz
3.5 t, electrohydraulic, symmetrical | 3 x 400 V / 50 Hz
-
2-post lift SGL35M 230 V – 1 Ph – 50-60 Hz
3.5 t, electrohydraulic, symmetrical | 1 x 230 V / 50 – 60 Hz
-
2-post lift SPOA40M-5-EH1
4.5 t, electrohydraulic, manual operation, 3-sectional support arms in front, asymmetrical, total height 3865 mm
-
2-post lift SPOA40M-5-EH2
4.5 t, electrohydraulic, manual operation, 3-sectional support arms in front, asymmetrical, total height 4170 mm
-
2-post lift SPOA40E-5-EH1
4.5 t, electrohydraulic, double control panel, front support arms 3-sectional, asymmetrical, total height 3865 mm
-
2-post lift SPOA40E-5-EH2
4.5 t, electrohydraulic, double control panel, front support arms 3-sectional, asymmetrical, total height 4170 mm
-
2-post lift SPO40M-5-EH2
4.5 t, electrohydraulic, manual operation, 3-sectional support arms in front x 4, symmetrical, total height 4170 mm
-
2-post lift SPO40M-5-EH4
4.5 t, electrohydraulic, manual operation, 3-sectional support arms in front x 4, symmetrical, total height 4780 mm
-
2-post lift SPO40E-5-EH1
4.5 t, electrohydraulic, double control panel, support arms 4 x 3-sections, symmetrical, total height 3865 mm
-
2-post lift SPO40E-5-EH2
4.5 t, electrohydraulic, double control panel, support arms 4 x 3-sections, symmetrical, total height 4170 mm
-
2-post lift SPO40E-5-EH4
4.5 t, electrohydraulic, double control panel, support arms 4 x 3-sections, symmetrical, total height 4780 mm
-
2-post lift SPO55E-EH1GR
5.5 t, electrohydraulic, 3-section support arms, symmetrical, double control panel, height 4475 mm
-
2-post lift SPO55E-EH2GR
5.5 t, electrohydraulic, 3-section support arms, symmetrical, double control panel, height 4780 mm
-
2-post lift SPO55E-EH4GR
5.5 t, electrohydraulic, 3-section support arms, symmetrical, double control panel, height 5432 mm
-
2-post lift SPO55E-GR
5.5 t, electrohydraulic, 3-section support arms, symmetrical, double control panel, height 4170 mm
-
2-post lift SPM32-E
3.2 t, electromechanical, symmetrical, 2-stage long arms, 3-stage short arms
-
2-post lift SPM32-S
3.2 t, electromechanical, load-bearing base, symmetrical posts, asymmetrical support arms, 2-stage long arms, 3-stage short arms, TEq-Link
-
2-post lift SPMA32-X
3.2 t, electromechanical, rotated columns at 45°, asymmetrical, 2-stage long arms, 3-stage short arms, TEq-Link
-
2-post lift SPMA32-XER
3.2 t, electromechanical, rotated columns at 45°, ultra-low symmetrical arms, TEq-Link, energy kit
-
2-post lift SPMA35-X
3.5 t, electromechanical, rotated columns at 45°, asymmetrical, 2-stage long arms, 3-stage short arms, TEq-Link
-
2-post lift SPMA35-XE
3.5 t, electromechanical, rotated columns at 45°, double control panel, 2-stage long arms, 3-stage short arms, asymmetrical, TEq-Link, energy kit
-
2-post lift SPMA35-XEV
3.5 t, electromechanical, asymmetrical, double control panel, rotated columns at 45°, EV arms, TEq-Link, energy kit
-
2-post lift SPM40AV
4.0 t, electromechanical, AV arms, symmetrical posts, 3-stage long arms, 3-stage short arms, TEq-Link
-
2-post lift SPM42-XEL
4.2 t, electromechanical, symmetrical, double control panel, 4 x 3-stage arms, TEq-Link, energy kit
-
2-post lift SPM42-XL
4.2 t, electromechanical, symmetrical, 4 x 3-stage arms, TEq-Link
-
2-post lift SPM55-XEL
5.5 t, electromechanical, symmetrical posts, asymmetrical support arms, double control panel, 4 long arms, 4-stage front arms, TEq-Link, energy kit
-
4-post lift SM40-47
4.0 t, electrohydraulic, track length 4700 mm, wheel alignment optional
-
4-post lift SM40LT-47
4.0 t, electrohydraulic, with wheel-free jack, track length 4700 mm, wheel alignment optional
-
4-post lift SM55LT-51
5.5 t, electrohydraulic, with wheel-free jack, track length 5100 mm, wheel alignment optional
-
Pads frame adapters kit
Pads frame adapters kit Ø 120 mm (1 set, 2 pcs), for turntable
-
Spacers for pads
4 x 200 mm, incl. bracket for mounting on the pillars | 1 set / 4 pieces
-
4-post lift SM55LT-51-ZP
5.5 t, electrohydraulic, with wheel-free jack, track length 5100 mm, wheel alignment optional, hot galvanized version
-
Gearbox plate GA passenger car
Adjustment angle +/- 10°, load capacity 400 kg, peg Ø 35 mm, measurements 300 x 240 mm, tensioning belts to secure the load, large rubber supporting surface | universally applicable for passenger cars, particularly suitable for Mercedes-Benz automatic transmissions
-
Stands for alignment
1 set / 4 pieces
-
Vehicles lift platforms
Ramp height 60 mm, for extremely low vehicles | 1 set / 2 pieces
-
Tool trays
Magnetic | 1 set / 2 pieces
-
Tool support
Ergonomic holder for impact wrench
-
Pad R
Support plate, rubber pad, round | load capacity 15 t, peg Ø 55 mm | 1 piece
-
Axial traverse ATH
1.5 t, peg Ø 35 mm, adjustment range 550 – 1200 mm, 1-fold telescopic | incl. 2 pads and 2 spacers
-
Gearbox plate GA III
Adjustment angle +/- 40° / +/- 17°, load capacity 1 t, peg Ø 35 mm, measurements 400 x 300 mm (adjustable up to 600 x 400 mm), tensioning belt to secure the load
-
Gearbox plate GA IV
Adjustment angle +/- 12°, load capacity 1 t, peg Ø 35 mm, measurements 546 x 381 mm, in series galvanised, tensioning belts to secure the load, large rubber supporting surface
-
Prismatic blocks
For GA IV | 2 pieces
-
Bushing 55/35
Peg Ø 55 mm, standard peg Ø gearbox plates 35 mm | for BLITZlifts with mount Ø 55 mm | 1 piece
-
Bushing 80/35
Peg Ø 80 mm, standard peg Ø gearbox plates 35 mm | for BLITZlifts with mount Ø 80 mm | 1 piece
-
Spacers for pads for electromechanical lifts
4 x 89 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | 1 set / 8 pieces
-
4-post lift SM65-51
6.5 t, electrohydraulic, track length 5100 mm, wheel alignment optional
-
Pads
Support plate, rubber pad, rectangular | for TESLA vehicles | 1 set / 4 pieces
-
Diagnostic kit STDADIAG
IDC5 KIT TEXA – for diagnostic wheel alignment | kit for those who have a wheel alignment but no TEXA accessories
-
Diagnostic kit STDADIAG/SW
TEXA IDC5 SW KIT – for diagnostic wheel alignment | kit for those who already have TEXA devices (e.g., ADAS RCSS)
-
4-post lift SM65-55
6.5 t, electrohydraulic, track length 5500 mm, wheel alignment optional
-
Pads
Support plate | for Mercedes G-Class – front and rear | 1 set / 4 pieces
-
Pads
Support plate, U-support | 1 set / 4 pieces
-
Pads
Support plate, centering mushroom | for Fiat 500E, 500 ABARTH | 2-stage | 1 set / 4 pieces
-
Supporting bridge GSV
Adjustable 900 – 1180 mm, capacity 15 t, with Rollerset
-
Traverse for HydroLift S3 7,5/8,2
16.4 t
-
Pads
Prism, mandrel | for Mercedes Sprinter, VW Crafter | 1 set / 6 pieces