Motor homes
Showing 100–198 of 584 results
-
Jacking beam
13.5 t, hand pump
-
Floor leveling for HDVL 25/35-110-I | galvanized
For vertical scissor lifts with 11 m platform length
-
Floor leveling for HDVL 25/35-120-I | galvanized
For vertical scissor lifts with 12 m platform length
-
Floor leveling for HDVL 25/35-60-I | galvanized
For vertical scissor lifts with 6 m platform length
-
Spacers for pads
4 x 90 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | Only for AV arms | 1 set / 8 pieces
-
4-post lift SM80-60
8.0 t, electrohydraulic, with level tracks, above ground
-
Adjustable drive
Additional adjustable drive to mobilise the fixed lifting unit, incl. extended hanging control pad, reversing device, chain and cover
-
Automatic ”run-into” protection
Light barrier max.15 m
-
Automatic ”run-into” protection
Position indicator for craneway
-
Automatic ”run-into” protection
Mount for automatic ”run-into” protection according to requirements
-
Automatic axle distance preselection
AAV-Control
-
Cable suspension
Balancer to disconnect hand-held control panel
-
Cable suspension
Mount for running rail according to requirements
-
Cross-beam for ArtisLift MRG55
15 t
-
Roll cover Flexcover
driveable with 5.0t wheel load, galvanized
-
Temporary cover
Wooden slats to insert in frame, capacity: max. 100 kg/m², per meter
-
Trolley SmartCart
for DUPLEX load-carrying equipment, incl. 4 swiveling rollers
-
Wheel fork extension for ArtisLift MRG55
Length approx. 123 mm | load capacity is reduced to 5 t | 1 set (for 1 wheel gripper)
-
Wheel fork reduction for mobile column lifts | tires Ø 800 – 700 mm
Reduction of the wheel fork for tires from Ø 800 mm to Ø 700 mm | 1 piece/per column
-
Aggregate assembly device V00-2
for Vito with V6 petrol engine)
-
Support plates
4 / 4.2 / 4.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
-
Universal support Ø 35 mm
Mounting hole Ø 35 mm, suitable for holding various tools, such as the transmission plate GA passenger car | fitted with a bushing
-
Floor leveling for HDVL 25/35-130/145-I
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 13/14,5 m platform length
-
Floor leveling for HDVL 25/35-130/145-I | galvanized
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 13/14.5 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length | hot galvanized version
-
Spacer DS 1
Height 100 mm, capacity 15 t
-
Spacer DS 2
Height 200 mm, capacity 15 t
-
Spacer DS 3
15 t, 35 mm peg diameter
-
Stand for the control cabine | 600 mm
1 piece
-
Support plate H
15 t, 35 mm peg diameter
-
Support plate P
15 t, 35 mm peg diameter
-
Support plate P MAN
15 t, 35 mm peg diameter
-
Support plate R
15 t, 35 mm peg diameter
-
Support plate U
15 t, 55 mm peg diameter
-
Support plate U
15 t, 35 mm peg diameter
-
Support plate U 145
15 t, 35 mm peg diameter
-
Support plate U 175
15 t, 35 mm peg diameter
-
Support plate U 220
15 t, 35 mm peg diameter
-
Support plate X
15 t, 35 mm peg diameter
-
Supporting bridge DB
Wooden blocks 100 x 200 x 360 mm, capacity 15 t
-
Transport trolley SmartCart XS | for Duplex load-carrying equipment
The convenient workshop helper with 33 slots – the attachments find their place in a tidy manner
-
Traverse ATB
15 t, 55 mm peg diameter, standard traverse for buses
-
Traverse ATS
15 t, 55 mm peg diameter
-
Cassette extended (primary coated)
Incl. FLEXCOVER, per meter
-
Cassette galvanized
Instead of primary coat, per meter
-
Floor leveling for HDVL 25/35-100-I | galvanized
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 10 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length | hot galvanized version
-
Frame extended (primary copated)
Incl. FLEXCOVER, per meter
-
Frame galvanized
Instead of primary coat, per meter
-
Frame with overhang
Frame incl. FLEXCOVER, each piece
-
Frame with overhang
Frame, galvanised execution, incl. FLEXCOVER, each piece
-
MRG-Kit for MRG-55
10 m power cable with CEE plug and 1 litre spindle oil | 1 set – only valid for ArtisLift MRG-55 with 4 lifting units, when expanding to a set of 6 or 8, 2 units must be ordered
-
Pump sump
for lift cassette
-
Floor leveling for HDVL 25/35-100-I
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 10 m platform length
-
Floor leveling for HDVL 25/35-80-I
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 8 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length
-
Floor leveling for HDVL 25/35-80-I | galvanized
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 8 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length | hot galvanized version
-
Floor leveling for HDVL 25/35-90-I
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 9 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length
-
Floor leveling for HDVL 25/35-90-I | galvanized
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 9 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length | hot galvanized version
-
Floor stand
800 mm wide (for T/L-4 platform)
-
Floor stand
1000 mm wide (for T/L-5 platform)
-
Retrofit kit Fast clamps
CCD kit for 3D Quick-clamps (VSG.FC167.701916 to VSG.FC169.701923) | 1 set / 2 pieces
-
Traverse ATEB S2
7.5 – 15 t, 45 mm peg diameter
-
Accessories holder for Portal Lift
6 slots, attached to lifting unit
-
Adaption for CDI-Motor V00-1
Weight: 5 kg, capacity: 250 kg
-
Eyebolt
5.5 t | facilitates the handling and installation of the lift, reusable for multiple installations | 1 set
-
Kit MRG pour ArtisLift MRG-25-4
10 m power cable with CEE plug, incl. 1 litre spindle oil | 1 set – only valid for ArtisLift MRG-25 with 4 lifting units
-
Pad
Steel clamp | load capacity 17 t | 1 piece
-
Support plate mount
1 included in the scope of delivery, 1 more recommended if the distance between the mounting points is less than 550 mm
-
Support plates
5.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
-
Traverse ATS
20 t, 55 mm peg diameter
-
Spacer DR 5
Height 500 mm, capacity 15-30 t
-
Spacer DR 6
Height 600 mm, capacity 30 t
-
Support platform 15 t, mobile
Transportable support platform lowered under load, for use in conjunction with U-brackets, primed and lacquered
-
Supporting bridge GS
Universal, capacity 15 t, with Rollerset
-
Supporting bridge GSB
Extra flat, capacity 15 t, with Rollerset
-
Supporting bridge GSB Vario
Extra flat, capacity 15 t, with Rollerset
-
Supporting Package I
15 t, 55 mm peg diameter, navigable
-
Supporting Package II
15.5 t, 55 mm peg diameter, navigable
-
Supporting Package IV
15 t, 55 mm peg diameter, navigable
-
Traverse ATB MAN TGA-Set
15 t, 55 mm peg diameter
-
Traverse ATB Truck-Set
15 t, 55 mm peg diameter
-
Traverse ATK
15 t, 55 mm peg diameter
-
LED lighting kit for Exa Lift HDVL | 6-way
8 / 9 / 10 m
-
Supporting Package III
15 t, 55 mm peg diameter, navigable
-
Mounting set for traverse ATT 3,2 C | for cars / vans / MAN / Crafter / Sprinter
optional accessories for the transporter receptacle, recommended plug-in pick-up set
-
Spacer DS 1
Height 100 mm, capacity 30 t
-
Spacer DS 2
30 t, 80 mm peg diameter
-
Spacer DS 3
Height 250 mm, capacity 30 t
-
Supporting bridge VS
Connecting set, capacity 30 t
-
4-post lift SM80-60 I
8.0 t, electrohydraulic, with level tracks, inground
-
Spacer DS 2
Height 150 mm, capacity 30 t
-
Spacer DS 3
30 t, 55 mm peg diameter
-
Support plate H
20 t, 80 mm peg diameter
-
Support plate H
20 t, 55 mm peg diameter
-
Supporting bridge GS
Universal, capacity 20 t, with Rollerset
-
Supporting Package I
20 t, 55 mm peg diameter, navigable
-
Supporting Package I
20 t, 80 mm peg diameter, navigable
-
Supporting Package II
20 t, 55 mm peg diameter. navigable
-
Supporting Package II
20 t, 80 mm peg diameter, navigable
-
Supporting Package IV
20 t, 55 mm peg diameter, navigable
-
Supporting Package IV
20 t, 80 mm peg diameter, navigable