Accessories lifts
Accessories for workshop lifts can seriously make a difference. Our selection of accessories lifts includes kits, rubber pads, covers and much more.
Showing 397–466 of 466 results
Traverse ATS
10 t, 55 mm peg diameter
Traverse ATT 3,2
Axle traverse double telescopic
Traverse ATT 3.2 C
3.2 t, 55 mm peg diameter, 2x extendable
Traverse ZS 100
1 set (2 pieces) intermediate pieces for high vehicle pick-up points, incl. rubber plate, to be placed on the support plate when plug-in extensions can no longer be positioned, suitable for all car crossbars. Heights 50mm or 100mm, load capacity 1.5 t
Traverse ZS 50
1 set (2 pieces) intermediate pieces for high vehicle pick-up points, incl. rubber plate, to be placed on the support plate when plug-in extensions can no longer be positioned, suitable for all car crossbars. Heights 50mm or 100mm, load capacity 1.5 t
Wheel alignment kit Premium
Height 75 mm, consisting of filling plates and 4 shifting plates, without turntables | for 4-post lift SM55LT-51 | Grey (RAL 7015) | ramp extension EXRMP-SM40N recommended
Gearbox plates GA passenger car
Load capacity 400 kg, universally applicable for passenger cars, particularly suitable for automatic transmissions
Pads
Support plate, rubber pad, adjustable – for quick-positioning on 4 heights | 4-stage | 1 set / 4 pieces
Supporting Package IV
10 t, 55 mm peg diameter, navigable
Auxiliary handle
For base plate SPO/A40 | 1 set / 2 pieces
Lowered traverse
Can travel along the whole adjusting range at floor level
Lowered traverse
In defined position, fitted at floor level
Pad ZF axles
Asymmetrical pad improves accessibility to the oil drain plugs of the AV132 and others
Spacer D 100
Height 100 mm
Spacer D 200
Height 200 mm
Spacer D 60
Height 60 mm
Standard acceptance G 145/150
Standard acceptance G 185/150
Standard acceptance G 220/110
Standard acceptance G 260/190
for rear axles with differential
Standard acceptance G 30/80
Standard acceptance G 40/150
Standard acceptance G 40/90
Standard acceptance G 50/60
Support plate A 120
Support plate A 50
Support plate A 60
Support plate E 140/100
Support plate E 190/230
Support plate E 270/230
Support plate R 116
Support plate R 150
Traverse ATB N
10 t, 55 mm peg diameter
Traverse ATEB
10 t, 55 mm peg diameter
Traverse T
Traverse TA
Traverse TP
Traverse TS special traverse cpl.
Traverse TS trolley
Adapter spigot 55 to 35 mm | for traverse ATT 3,2 C / jack | 135 mm
Reduction from 55 to 35 mm, necessary when using the traverse ATT 3,2 C with 55 mm spigot on a jack (e.g. Junior Jack) with 35 mm mounting hole
Extension for traverse ATT 3,2 C | 127 mm
2 pieces
Extension for traverse ATT 3,2 C | 80 mm
2 pieces
Mounting set for buses
Scope of delivery: 2x spacer 60 mm 2x spacer 100 mm 2x mounting fork 40/160/30 2x supporting plate 140/100/16 with aluminum support 2x mounting spigot Ø 50/30
Mounting set Universal | for trucks and buses
Scope of delivery: 2x spacer 60 mm 2x spacer 100 mm 2x mounting fork 40/160/30 2x mounting fork 170/190/25 2x supporting plate 140/100/16 with aluminum support
Pads
Prism | for Mercedes Sprinter, VW Crafter – rear / for SPO65E | 1 set / 2 pieces
Pads
Support plate, rubber pad, round | for SPO65 | 1 set / 4 pieces
Pads
Mandrel | for Mercedes Sprinter, VW Crafter – front / for SPO65 | 1 set / 2 pieces
Receptacle for semitrailer on kingpin
Reducer
Ø 2.75″ to 2″, adapter for mounting accessories SPOA3T/SP040/SPO55 | for SPO65 | 1 piece
Support plate X
30 t, 80 mm peg diameter
Support plates
3.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Support plates
3.2 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Supporting bridge GS
Universal, capacity 30 t, with Rollerset
Supporting Package I
30 t, 80 mm peg diameter, navigable
Supporting Package II
30 t, 80 mm peg diameter, navigable
Supporting Package IV
30 t, 80 mm peg diameter, navigable
Traverse ATK
30 t, 80 mm peg diameter
Traverse ATS
30 t, 80 mm peg diameter
Connection Kit VS ATT 3,2
For secure placement of an axle load ATT 3,2 on the support bridge GS / GSB
Supporting arm extensions
Capacity reduced to 3.7 t | for LIK arms | 1 set / 2 pieces
Eyebolt
5.5 t | facilitates the handling and installation of the lift, reusable for multiple installations | 1 set
Pads
Support plate, U-support | 1 set / 4 pieces
Spacers for pads
4 x 89 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | for SPOA40 | 1 set / 8 pieces
LED lighting kit for commercial vehicle scissor lifts S90 / S130
Support plates
4 / 4.2 / 4.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
Drive-on ramp kit
2950 mm, lacquered version, dowel to the floor (fixing material not included) | incl. cover plates for hydraulic hoses | for S90/S130 | 1 set / 2 pieces
Drive-on ramp kit
3700 mm, lacquered version | for S90/S130 | 1 set / 2 pieces
Spacers for pads for electrohydraulic lifts
4 x 89 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | 1 set / 8 pieces
Wheel fork reduction for mobile column lifts | tires Ø 700 – 500 mm
Reduction of the wheel fork for tires from Ø 700 mm to Ø 500 mm | 1 piece/per column
Wheel fork reduction for mobile column lifts | tires Ø 800 – 700 mm
Reduction of the wheel fork for tires from Ø 800 mm to Ø 700 mm | 1 piece/per column