Accessories lifts
Accessories for workshop lifts can seriously make a difference. Our selection of accessories lifts includes kits, rubber pads, covers and much more.
Showing 496–555 of 555 results
-
Extension Kit for ramps
-
Floor leveling for HDVL 25/35-100-I
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 10 m platform length
-
Floor leveling for HDVL 25/35-100-I | galvanized
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 10 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length | hot galvanized version
-
Floor leveling for HDVL 25/35-130/145-I
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 13/14,5 m platform length
-
Floor leveling for HDVL 25/35-130/145-I | galvanized
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 13/14.5 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length | hot galvanized version
-
Floor leveling for HDVL 25/35-80-I | galvanized
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 8 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length | hot galvanized version
-
Floor leveling for HDVL 25/35-90-I | galvanized
Safety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, for HDVL lifts with 9 m platSafety cover of the foundation opening when the lifting platform is raised, load capacity 500 kg, form length | hot galvanized version
-
Floor stand
800 mm wide (for T/L-4 platform)
-
Floor stand
1000 mm wide (for T/L-5 platform)
-
Frame extended (primary copated)
Incl. galvanised slide covering, per meter
-
Frame extended (primary copated)
Incl. FLEXCOVER, per meter
-
Frame galvanized
Instead of primary coat, per meter
-
Frame with overhang
incl. galvanised slide covering, each piece
-
Frame with overhang
galvanised execution, incl. galvanised slide covering, each piece
-
Frame with overhang
Frame incl. FLEXCOVER, each piece
-
Frame with overhang
Frame, galvanised execution, incl. FLEXCOVER, each piece
-
Front and rear adapters for HydroLift
16.4 t | for lifting various tractors, incl. various agricultural adapters
-
Inground Kit 4 short ramps
Underfloor installation set consisting of 4 short ramps (1 set / 4 pcs.) for subsequent conversion from above and below ground level
-
Inground kit 4 short ramps with wheel alignment version
Underfloor installation set consisting of 4 short ramps with wheel alignement version (1 set / 4 pcs.) for subsequent conversion from overfloor and underfloor
-
Installation box for floor-level installation
Supporting boxes for folding ramps
-
Installation box for floor-level installation, incl. mounting frame
Galvanized
-
Jacking beam
13.5 t, hand pump
-
Jacking beam for S38/V45-V65 | 2.6 t
2.6 t
-
Jacking beam for SM40-SM65 | 2.6 t
2.6 t
-
Jacking beam for SM65 4.0 t
4.0 t
-
Jacking beam VAS 791023/1
4.0 t
-
LED lighting kit 4-fold, 24 V, 4800 mm
-
LED lighting kit for Exa Lift HDVL | 8-way
8-way | for HDVL lifts with 11, 12, 13 or 14,5 m platform length | suitable for washing bay, mounted on the inside of the rails
-
LED lighting kit Standard | for HydroLift 6,2/7,5/8,2
Incl. cable set, bracket and installation instructions | 2 pieces
-
Pads VAS 6355A/2
Mandrel, long | for Mercedes Sprinter, VW Crafter – front / for SPO65 | 1 set / 2 pieces
-
Power Kit 230 V
-
Protection cover for HydroLift 8,2
Flexible, sturdy protective cover with magnets to prevent splashing water | Only for battery-powered wheel grippers | 1 piece
-
Pump sump
for lift cassette
-
Ramp extension
Optional for wheel alignment | for SM40/55/LT/65
-
Retrofit kit Air supply
For jacking beam
-
Roll cover Flexcover
driveable with 5.0t wheel load, galvanized
-
Rubber pad Truncated pyramid
30 mm, with grip coatings | 1 set / 4 pieces
-
Rubber pad Truncated pyramid
70 mm, with grip coatings | 1 set / 4 pieces
-
Rubber pads
160 x 120 x 40 mm | 1 set / 4 pieces
-
Rubber pads
160 x 120 x 80 mm | 1 set / 4 pieces
-
Second control unit
For SPOA3TS – not suitable for EV | 1 piece
-
Stand for the control cabine | 600 mm
1 piece
-
Supporting arm extensions
250 mm | for SPO55 | 1 set / 4 pieces
-
Surcharge for rail chassis with lateral flanged rollers (set consisting of 4 pieces)
-
Synchronization control Twin | for Exa Lift HDVL
2 lifts synchronised or individually movable | incl. 2 separate control boxes with controls and cable with plug
-
Temporary cover
Wooden slats to insert in frame, capacity: max. 100 kg/m², per meter
-
Traverse for HydroLift 6,2
Max. load bearing capacity 12.4 t, king pin support | only in conjunction with traverse (item no. 120204)
-
Traverse for HydroLift 6,2
12.4 t
-
Traverse for HydroLift S3 7,5/8,2
16.4 t
-
Traverse for HydroLift S3 7,5/8,2
Max. load bearing capacity 16.4 t, king pin support | only in conjunction with traverse (item no. 119777)
-
Trolley SmartCart
for DUPLEX load-carrying equipment, incl. 4 swiveling rollers
-
Universal support Ø 35 mm
Mounting hole Ø 35 mm, suitable for holding various tools, such as the transmission plate GA passenger car | fitted with a bushing
-
Wheel alignment kit P for SM40-47
Premium | N-type, height 50 mm, consisting of filling plates and 2 shifting plates, without turntables | for 4-post lift SM40-47 | Grey (RAL 7015) | ramp extension EXRMP-SM40N recommended
-
Wheel alignment kit P for SM55LT-51
Premium | Height 75 mm, consisting of filling plates and 4 shifting plates, without turntables | for 4-post lift SM55LT-51 | Grey (RAL 7015) | ramp extension EXRMP-SM40N recommended
-
Wheel alignment kit Premium | for SM65-55
N-type, for level platform, without turntables | for 4-post lift SM65-55 | Grey (RAL 7015)
-
Wheel alignment kit Standard | for SM65-51
N-type, height 50 mm, consisting of filling plates and 4 shifting plates, without turntables | for 4-post lift SM65-51 | Grey (RAL 7040) | ramp extension EXRMP-SM40N recommended
-
Wheel alignment kit Standard | for SM65-55
N-type, height 50 mm, consisting of filling plates and 4 sliding plates, without turntables | for 4-post lift SM65-55 | Grey (RAL 7040) | EXRMP-SM40N ramp extension recommended
-
Wheel alignment kit STD for SM40-47
Standard | N-type, incl. 2 balance plates | for 4-post lift SM40-47 | Grey (RAL 7040)
-
Wheel alignment kit STD for SM40LT-47
Standard | N-type, height 50 mm, consisting of filling plates and 2 shifting plates, without turntables | for 4-post lift SM40LT-47 | Grey (RAL 7040)
-
Wheel alignment kit STD for SM55LT-51
Standard | Height 75 mm, consisting of filling plates and 4 shifting plates, without turntables | for 4-post lift SM55LT-51 | Grey (RAL 7040) | ramp extension EXRMP-SM40N recommended