Accessories lifts
Accessories for workshop lifts can seriously make a difference. Our selection of accessories lifts includes kits, rubber pads, covers and much more.
Showing 1–99 of 575 results
-
Additional platform for three wheelers
For all electro-hydraulic scissor lifts
-
Adjustable front pad kit
-
Aggregate plate with supporting arms GA P (Porsche)
A particularly versatile aggregate plate for the removal and installation of engines, transmissions, axles, exhaust systems, etc.
-
Agricultural adapters 1 set / 2 pieces
To lift agricultural tractor | front and rear adapter
-
Brakets for 3D alignment
1 set / 2 pieces
-
Bushing 55/35
Peg diameter = 55 mm, standard Peg Ø of the axle traverse = 35 mm
-
Bushing 55/45
Peg diameter = 55 mm, standard Peg Ø of the axle traverse = 45 mm, with collar
-
Bushing 80/35
Peg diameter = 80 mm, standard Peg Ø of the axle traverse = 35 mm
-
Bushing 80/45
Peg diameter = 80 mm, standard Peg Ø of the axle traverse = 45 mm
-
Cable remote control
For capacity 3000 / 4000 / 5500 (excluded N version) / 7000 / 8500 / 10000 kg
-
Cassette extended (primary coated)
Incl. galvanized slide covering, per meter
-
Column connection cable extension by “m” meter
Cables between columns “m” meters longer than standard
-
Connection template
For front/back base connection | necessary for lift installation
-
Control unit cover for all electro-hydraulic scissor lifts
To protect the control panel | for all models
-
Control unit cover for lifts
To protect the control panel
-
Cross beam for U-versions
Capacity 20 t
-
Cross beam max. 20000 kg
Crossbar for standard lifts with adjustable fork
-
Door protections for 2-post lifts
1 set / 2 pieces
-
Drive-on plates Aluminium
for easy positioning of the support arms under the vehicle (1 set / 4 pieces)
-
Drive-on ramp kit
Long, 1500 mm | for 4-post lifts RAV4406LSI, RAV4502LSI | 1 pair
-
Drive-on ramp kit
2950 mm, ground ramps | floor installation kit for lifts | 1 set / 2 pieces
-
Drive-on ramp kit
3700 mm, ground ramps | floor installation kit for lifts | 1 set / 2 pieces
-
Drive-on ramp kit
1350 mm, ground ramps | floor installation kit for 600N series lifts with wheel-free jack | 1 set / 2 pieces
-
Drive-on ramp kit
1350 mm, ground ramps | floor installation kit for 600N series lifts without wheel-free jack | 1 set / 2 pieces
-
Drive-on ramp kit
1560 mm, suspended ramps | floor installation kit for 600N series lifts with wheel-free jack | 1 set / 2 pieces
-
Drive-on ramp kit
1560 mm, suspended ramps | floor installation kit for 600N series lifts without wheel-free jack | 1 set / 2 pieces
-
Drive-on ramp kit
1800 mm, ground ramps | floor installation kit for 600N series lifts with wheel-free jack | 1 set / 2 pieces
-
Drive-on ramp kit
2000 mm, suspended ramps | floor installation kit for 600N series lifts with wheel-free jack | 1 set / 2 pieces
-
Drive-on ramp kit
2000 mm, suspended ramps | floor installation kit for 600N series lifts without wheel-free jack | 1 set / 2 pieces
-
Drive-on ramp kitit
1800 mm, ground ramps | floor installation kit for 600N series lifts without wheel-free jack | 1 set / 2 pieces
-
Drive-through ramp kit
For RAV4401, RAV4402, RAV4401SI | 1 set / 2 pieces
-
Drive-through ramp kit
For RAV4402SI | 1 set / 2 pieces
-
Drive-through ramp kit
For RAV4405L, RAV4405LSI, RAV4501L | 1 set / 2 pieces
-
Drive-through ramp kit
For RAV4406L, RAV4502L | 1 set / 2 pieces
-
Drive-through ramp kit
For RAV4406L, RAV4502L | 1 set / 2 pieces
-
Drive-through ramp kit
For RAV4651L | 1 set / 2 pieces
-
Drive-through ramp kit
For RAV4800 | 1 set / 2 pieces
-
Drive-through ramps 1350 mm, ground ramps
Additional ramps to drive-through the lift, for 600N series lifts with wheel-free jack | 1 set / 2 pieces
-
Drive-through ramps 1350 mm, ground ramps
Additional ramps to drive-through the lift, for 600N series lifts without wheel-free jack | 1 set / 2 pieces
-
Drive-through ramps 1560 mm, suspended ramps
Additional ramps to drive-through the lift, for 600N series lifts with wheel-free jack | 1 set / 2 pieces
-
Drive-through ramps 1560 mm, suspended ramps
Additional ramps to drive-through the lift, for 600N series lifts without wheel-free jack | 1 set / 2 pieces
-
Drive-through ramps 1800 mm, suspended ramps
Additional ramps to drive-through the lift, for 600N series lifts with wheel-free jack | 1 set / 2 pieces
-
Drive-through ramps 1800 mm, suspended ramps
Additional ramps to drive-through the lift, for 600N series lifts without wheel-free jack | 1 set / 2 pieces
-
Drive-through ramps 2000 mm, suspended ramps
Additional ramps to drive-through the lift, for 600N series lifts with wheel-free jack | 1 set / 2 pieces
-
Drive-through ramps 2000 mm, suspended ramps
Additional ramps to drive-through the lift, for 600N series lifts without wheel-free jack | 1 set / 2 pieces
-
Energy kit for KPH370.xx
Compressed air connection and 230 V socket | 1 piece
-
Engine support for KT100 (Mercedes)
for KT100 (Mercedes)
-
Extensions for rear platforms | 280 mm
For 4-post lifts | 1 pair
-
Factory assembly of the adjustable front pad kit S240A1 on the lift
-
Factory assembly of the adjustable front pad kit S290A1 on the lift
of the adjustable front pad kit S290A1 on the lift
-
Factory assembly of the play detector on the lift
of the play detector on the lift
-
Frame extended (primary copated)
Incl. galvanised slide covering, per meter
-
Frame with overhang
incl. galvanised slide covering, each piece
-
Frame with overhang
galvanised execution, incl. galvanised slide covering, each piece
-
Front wheel stops S4800A6 | as replacement for original wheel stops
For loading the new “maxi” VW van with double rear axle
-
Gearbox plate
Optional for pit lifts, suspended
-
Hose extension
“m” meter, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
-
Hose extension
“m” meter, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
-
Hose extension
“m” meter, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
-
Hose extension
“m” meter, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
-
Hose extension
“m” meter, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
-
Hose extension
“m” meter, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
-
Illumination Kit
-
Jacking beam VAS 791023/1
4.0 t
-
LED lighting kit
-
LED lighting kit
-
LED lighting kit 6-fold
-
Lifting bracket
-
Limit switch | operated by bar | for 1-phase power supply | supplied not installed
For all lifts with 1-phase power supply
-
Limit switch | operated by bar | for 3-phase power supply | supplied not installed
For all lifts with 3-phase power supply
-
Limit switch | operated by elastic spring | supplied not installed
For all the lifts with control unit in the upper part of the column (VARPH370.xx/T)
-
Long front ramps
-
Long front ramps
-
Long front ramps 1200 mm
-
Long front ramps 1200 mm
-
Mounting set
For 305 series | fitted in factory instead of standard pads
-
Pads
Prism | for Mercedes Sprinter, VW Crafter – rear / for SPO65E | 1 set / 2 pieces
-
Pads
Support plate, rubber pad, rectangular | peg Ø 45 mm | for Tesla / lifts with K arms | 1 set / 4 pieces
-
Pads
Support plate, rubber pad, rectangular | peg Ø 55 mm | for Tesla / lifts with K arms | 1 set / 4 pieces
-
Pads
Prism, mandrel | peg Ø 45 mm | for Mercedes Sprinter, VW Crafte – only in conjunction with spacers S224A3, S224A4, S370A18 | 1 set / 4 pieces
-
Pads
Support plate, U-support | peg Ø 60 mm | only in conjunction with spacers S370A7, S370A8, S370A15 | 1 set / 4 pieces
-
Pads
Support plate, U-support | peg Ø 45 mm | only in conjunction with spacers S224A3, S224A4, S370A18 | 1 set / 4 pieces
-
Pads 2.7 – 3.2 t | 1 set / 4 pieces
For lifts with capacity 2.7 – 3.2 t
-
Pads for 2-post lifts
Support plate, centering mushroom | for Fiat 500E, 500 ABARTH | 2-stage | 1 set / 4 pieces
-
Pads VAS 6355A/2
Mandrel, long | for Mercedes Sprinter, VW Crafter – front / for SPO65 | 1 set / 2 pieces
-
Pick-up adapter for SPO55
2 x left / 2 x right, 1250 kg each | not compatible with AE-250 | 1 set / 4 pieces
-
Pipe cover 1 m
For surface installation of lifts
-
Pit expansion BusStop
Abstract segment
-
Pit frame Type A
weight: 46 kg/m, a = 870 mm, per meter
-
Pit frame Type A
weight: 46 kg/m, a = 870 mm, per meter
-
Pit frame Type B
weight: 55Kg/m, a = 940 mm, per meter
-
Pit frame Type B
weight: 55 kg/m, a = 940 mm, per meter
-
Pit frame Type B1
weight: 42 kg/m, a = 940 mm, per meter
-
Pit frame Type B1
weight: 42 kg/m, a = 940 mm, per meter
-
Pit frame Type E
weight: 82 kg/m, a = 940 mm, per meter
-
Pit frame Type E
weight: 82 kg/m, a = 940 mm, per meter
-
Pit frame Type E1
weight: 69 kg/m, a = 940 mm, per meter
-
Pit frame Type E1
weight: 69 kg/m, a = 940 mm, per meter
-
Pit frame Type F
weight: 71.4 kg/m, a = 940 mm, per meter