Trailer
Showing 100–198 of 286 results
-
Pad U 145
Support plate, fork | load capacity 15 t, peg Ø 35 mm | 1 piece
-
Pad U 175
Support plate, fork | load capacity 15 t, peg Ø 35 mm | 1 piece
-
Pad U 220
Support plate, fork | load capacity 15 t, peg Ø 35 mm | 1 piece
-
Pad X
Steel clamp | load capacity 30 t, peg Ø 80 mm | 1 piece
-
Pad X
Steel clamp | load capacity 20 t, peg Ø 55 mm | 1 piece
-
Pad X
Steel clamp | load capacity 15 t, peg Ø 35 mm | 1 piece
-
Pit expansion BusStop
Abstract segment
-
Pit frame Type A
weight: 46 kg/m, a = 870 mm, per meter
-
Pit frame Type A
weight: 46 kg/m, a = 870 mm, per meter
-
Pit frame Type B
weight: 55Kg/m, a = 940 mm, per meter
-
Pit frame Type B
weight: 55 kg/m, a = 940 mm, per meter
-
Pit frame Type B1
weight: 42 kg/m, a = 940 mm, per meter
-
Pit frame Type B1
weight: 42 kg/m, a = 940 mm, per meter
-
Pit frame Type E
weight: 82 kg/m, a = 940 mm, per meter
-
Pit frame Type E
weight: 82 kg/m, a = 940 mm, per meter
-
Pit frame Type E1
weight: 69 kg/m, a = 940 mm, per meter
-
Pit frame Type E1
weight: 69 kg/m, a = 940 mm, per meter
-
Pit frame Type F
weight: 71.4 kg/m, a = 940 mm, per meter
-
Pit frame Type F
weight: 71.4 kg/m, a = 940 mm, per meter
-
Pit frame Type F1
weight: 62.5 kg/m, a = 940 mm, per meter, galvanised (both side)
-
Pit frame Type F1
weight: 62.5 kg/m, a = 940 mm, per meter, primecoated (both side)
-
Prismatic blocks
For GA IV | 2 pieces
-
Segment Pit Covering
for monolithic constructed pits, per meter
-
Spacer D 100
15 t, peg Ø 75 mm, 100 mm | 1 piece
-
Spacer D 200
15 t, peg Ø 75 mm, 200 mm | 1 piece
-
Spacer D 60
15 t, peg Ø 75 mm, 60 mm | 1 piece
-
Spacer DS 1
15 t, peg Ø 35 mm, 100 mm | 1 piece
-
Spacer DS 1
30 t, peg Ø 55 mm, 100 mm | 1 piece
-
Spacer DS 2
15 t, peg Ø 35 mm, 150 mm | 1 piece
-
Spacer DS 2
30 t, peg Ø 80 mm, 150 mm | 1 piece
-
Spacer DS 2
30 t, peg Ø 55 mm, 150 mm | 1 piece
-
Spacer DS 3
15 t, peg Ø 35 mm, 250 mm | 1 piece
-
Spacer DS 3
30 t, peg Ø 55 mm, 250 mm | 1 piece
-
Spacer DS 3
30 t, peg Ø 80 mm, 250 mm | 1 piece
-
Spacer tube DR 4
10 t, peg Ø 35 mm, 400 mm | 1 piece
-
Spacer tube DR 4
15 – 20 t, peg Ø 55 mm, 400 mm | 1 piece
-
Spacer tube DR 5
15 – 30 t, peg Ø 55 mm, 500 mm | 1 piece
-
Spacer tube DR 6
10 t, peg Ø 35 mm, 600 mm | 1 piece
-
Spacer tube DR 6
30 t, peg Ø 80 mm, 600 mm | 1 piece
-
Support platform
15 t, mobile | for use in conjunction with U-brackets, primed and lacquered, lowered under load
-
Supporting block DB
Wooden block, 100 x 200 x 360 mm, load capacity 15 t | for lowering the traverse onto the supporting bridge | 1 piece
-
Supporting bridge GS 10
10 t | Universal | to ensure that the vehicle is tilt-proof – pit lift can still be used | incl. roller set, 2 sliders, 2 spacer tubes, 2 pads, traverses and tool tray
-
Supporting bridge GS 15
15 t | Universal | to ensure that the vehicle is tilt-proof – pit lift can still be used | incl. roller set, 2 sliders, 2 spacer tubes, 2 pads, traverses and tool tray
-
Supporting bridge GS 20
20 t | Universal | to ensure that the vehicle is tilt-proof – pit lift can still be used | incl. roller set, 2 sliders, 2 spacer tubes, 2 pads, traverses and tool tray
-
Supporting bridge GS 30
30 t | Universal | to ensure that the vehicle is tilt-proof – pit lift can still be used | incl. roller set, 2 sliders, 2 spacer tubes, 2 pads, traverses and tool tray
-
Supporting bridge GSB
10 t | super flat, accessible for low-floor buses | incl. roller set, 2 sliders, 2 spacer tubes and 2 pads
-
Supporting bridge GSB
15 t | super flat, accessible for low-floor buses | incl. roller set, 2 sliders, 2 spacer tubes and 2 pads
-
Supporting bridge GSB Vario
15 t | super flat, accessible for low-floor buses | incl. roller set, 2 sliders, 2 spacer tubes and 2 pads
-
Supporting bridge GSV
15 t, adjustable 900 – 1180 mm | pit lift can still be used | incl. roller set, 2 sliders, 2 spacer tubes, 2 pads and tool tray
-
Supporting bridge SPZ-15
-
Supporting Package I
10 t, peg Ø 55 mm, navigable
-
Supporting Package I
15 t, peg Ø 55 mm, movable | minimum equipment of a working pit | incl. supporting bridge GS, traverse ATS, 2 spacers and connecting set
-
Supporting Package I
20 t, peg Ø 55 mm, navigable
-
Supporting Package I
30 t, peg Ø 80 mm, navigable
-
Supporting Package I
20 t, peg Ø 80 mm, navigable
-
Supporting Package II
11 t, peg Ø 55 mm, navigable
-
Supporting Package II
20 t, peg Ø 55 mm. navigable
-
Supporting Package II
20 t, peg Ø 80 mm, navigable
-
Supporting Package II
30 t, peg Ø 80 mm, navigable
-
Supporting Package II
15 t, peg Ø 55 mm, movable | basic equipment for lorry workshops with universal vehicle access | incl. 2 supporting bridges GS, 2 traverses (ATS, ATK), 2 spacers, connecting set and 2 spacer tubes
-
Supporting Package III
15 t, peg Ø 55 mm, movable | for bus and transport companies (low-floor buses) | incl. supporting bridge GSB, traverse ATB, 3 pads and 2 wooden blocks
-
Supporting Package III
10 t, peg Ø 55 mm, navigable
-
Supporting Package IV
10 t, peg Ø 55 mm, navigable
-
Supporting Package IV
15 t, peg Ø 55 mm, movable | for repair shops with universal vehicle access – specialising in trucks, Unimogs, construction and specialised vehicles | incl. 3 traverses (ATK, ATS, ATB), 3 supporting bridges GS, 2 wooden blocks, 5 pads, 2 spacer tubes and 8 spacers
-
Supporting Package IV
20 t, peg Ø 55 mm, navigable
-
Supporting Package IV
20 t, peg Ø 80 mm, navigable
-
Supporting Package IV
30 t, peg Ø 80 mm, navigable
-
Transport trolley for traverse TS
-
Traverse ATB
10 t, peg Ø 55 mm
-
Traverse ATB
15 t, peg Ø 55 mm | standard traverse for buses, incl. 2 sliders and 4 pads
-
Traverse ATB N
10 t, peg Ø 55 mm
-
Traverse ATK
10 t, peg Ø 55 mm | front axle fork, incl. 2 pads
-
Traverse ATK
30 t, peg Ø 80 mm
-
Traverse ATK
20 t, peg Ø 55 mm | front axle fork, incl. 2 pads
-
Traverse ATK
20 t, peg Ø 55 mm | front axle fork, incl. 2 pads
-
Traverse ATK
15 t, peg Ø 55 mm | front axle fork, incl. 2 pads
-
Traverse ATS
20 t, peg Ø 55 mm
-
Traverse ATS
10 t, peg Ø 55 mm
-
Traverse ATS
30 t, peg Ø 80 mm
-
Traverse ATS
20 t, peg Ø 80 mm
-
Traverse ATS 15
15 t, peg Ø 55 mm | standard traverse for trucks | incl. 2 sliders, 2 pads and 2 spacers
-
Traverse set ATB
15 t, peg Ø 55 mm | accessories for supporting trucks | incl. 2 sliders, 2 pads and 2 spacers
-
Traverse set ATB | 10 t
10 t, peg Ø 35 mm | accessory set for supporting trucks | incl. 2 sliders, 2 pads and 2 spacers
-
Traverse set ATB MAN TGA
15 t, peg Ø 55 mm | accessories for supporting MAN trucks at the axles | incl. connecting set, 4 pads and 4 spacers
-
Traverse set TP
Especially suitable for the reception of downhill tracks
-
Traverse T
-
Traverse TA
-
Traverse TS
2180 x 203 mm | special traverse complete
-
Truck traverse TEF-15 | Universal
1 piece, 1-fold telescopic, adjustment range 710 – 1040 mm (510 – 840 mm), load capacity 15 t (center)
-
Truck traverse TTS-15 | Double extension
15 t (center), 2-fold telescopic, adjustment range 880 – 1500 mm (520 – 1140 mm)
-
Water drain/filter combination
Water separator, fitted in factory | to protect the control system and pump from harmful condensation | max. operating pressure 16 bar
-
Kit MRG pour ArtisLift MRG-25-4
10 m power cable with CEE plug, incl. 1 litre spindle oil | 1 set – only valid for ArtisLift MRG-25 with 4 lifting units
-
MRG-Kit for MRG-55
10 m power cable with CEE plug and 1 litre spindle oil | 1 set – only valid for ArtisLift MRG-55 with 4 lifting units, when expanding to a set of 6 or 8, 2 units must be ordered
-
Pad
Steel clamp | load capacity 17 t | 1 piece
-
Protection cover for HydroLift 6,2/7,5
Flexible, sturdy protective cover with magnets to prevent splashing water | Only for battery-powered wheel grippers | 1 piece
-
Transport trolley SmartCart XS | for Duplex load-carrying equipment
The convenient workshop helper with 33 slots – the attachments find their place in a tidy manner
-
Wheel fork extension for ArtisLift MRG55
Length approx. 123 mm | load capacity is reduced to 5 t | 1 set (for 1 wheel gripper)
-
Wheel fork reduction for mobile column lifts | tires Ø 800 – 700 mm
Reduction of the wheel fork for tires from Ø 800 mm to Ø 700 mm | 1 piece/per column
-
CCD wheel aligner RWA5100HDB.3
2 portable boxes, CCD wheel aligner for trucks, with 6 lowered CCD sensors, 3-point wheel clamps, cylinder adapter kit, 12″ LCD Windows tablet, wheeled suitcase with external power plug and cord