Tracked vehicles
Showing 1–99 of 255 results
-
Water drain/filter combination for Portal Lift 17 Vario
Water separator, fitted in factory | to protect the control system and pump from harmful condensation | max. operating pressure 16 bar
-
In ground truck lift DUPLEX T 4-15-1900 R
4 lifting unit, 4 x 15 t, length of frame: 21 m, 1900 mm stroke, galvanized roll cover FLEXCOVER
-
In ground truck lift DUPLEX T 4-15-1900 W
4 lifting unit, 4 x 15 t, length of cassette: 21 m, 1900 mm stroke, galvanized roll cover FLEXCOVER
-
In ground truck lift DUPLEX T 5-15-1900 R
5 lifting unit, 5 x 15 t, length of frame: 25 m, 1900 mm stroke, galvanized roll cover FLEXCOVER
-
In ground truck lift DUPLEX T 5-15-1900 W
5 lifting unit, 5 x 15 t, length of frame: 25 m, 1900 mm stroke, galvanized roll cover FLEXCOVER
-
In ground truck lift DUPLEX T 6-15-1900 R
6 lifting unit, 6 x 15 t, length of frame: 30 m, 1900 mm stroke, galvanized roll cover FLEXCOVER
-
In ground truck lift DUPLEX T 6-15-1900 W
6 lifting unit, 6 x 15 t, length of cassette: 30 m, 1900 mm stroke, galvanized roll cover FLEXCOVER
-
Mobile column lift HydroLift S3 1-7.5 (wireless)
1 x 7.5 t, electrohydraulic, wireless, battery powered | Extension column to form a set of 3 or 5 – ideal for the agricultural sector
-
Mobile column lift HydroLift S3 2-7.5 (wireless)
2 x 7.5 t, electrohydraulic, wireless, battery powered
-
Mobile column lift HydroLift S3 1-8,2
1 x 8.2 t, electrohydraulic, wireless, battery powered | Extension column to form a set of 3 or 5 – ideal for the agricultural sector | Grey (RAL 7016)
-
Mobile column lift HydroLift S2 2-8,2
2 x 8.2 t, electrohydraulic, wireless, battery powered
-
Mobile column lift HydroLift S2 Agrar 2-5
2 x 5.0 t, electrohydraulic, wireless, battery powered | Grey (RAL 7016)
-
Mobile column lift HydroLift S2 Agrar 4-5
4 x 5.0 t, electrohydraulic, wireless, battery powered
-
Mobile column lift HydroLift S2 Agrar 6-5
6 x 5.0 t, electrohydraulic, wireless, battery powered
-
Mobile column lift HydroLift S3 2-6.2 Agrar
2 x 6.2 t, electrohydraulic, wireless, battery powered, with agricultural adapters
-
Mobile column lift HydroLift S3 2-7.5 Agrar
2 x 7.5 t, electrohydraulic, wireless, battery powered, with agricultural adapters
-
Mobile column lift HydroLift S2 8.2 Agrar
2 x 8.2 t, electrohydraulic, wireless, battery powered, with agricultural adapters
-
Mobile column lift HydroLift S3 2-6.2
2 x 6.2 t, electrohydraulic, cable-bound
-
Mobile column lift HydroLift S3 4-6.2
4 x 6.2 t, electrohydraulic, cable-bound
-
Mobile column lift HydroLift S3 6-6.2
6 x 6.2 t, electrohydraulic, cable-bound
-
Mobile column lift HydroLift S3 8-6.2
8 x 6.2 t, electrohydraulic, cable-bound
-
Mobile column lift HydroLift S3 2-7.5
2 x 7.5 t, electrohydraulic, cable-bound
-
Mobile column lift HydroLift S3 4-7.5
4 x 7.5 t, electrohydraulic, cable-bound
-
Mobile column lift HydroLift S3 6-7.5
6 x 7.5 t, electrohydraulic, cable-bound
-
Mobile column lift HydroLift S3 8-7.5
8 x 7.5 t, electrohydraulic, cable-bound
-
Gearbox lift Junior Jack 1,2 S2
1,2 t, 1100 mm stroke, air-hydraulic
-
Gearbox lift Junior Jack 2,0 S2
2.0 t, 1100 mm stroke, air-hydraulic
-
Gearbox lift Master Jack 2,5
2.5 t, 1100 mm stroke, air-hydraulic, foot control
-
Gearbox lift Master Jack 4,0
4.0 t, 1100 mm stroke, air-hydraulic, foot control
-
Lifting table MGE 2.0
2.0 t, 1000 mm stroke, air hydraulic pump | Grey (RAL 7015)
-
Accessories holder for Portal Lift
6 slots, attached to lifting unit
-
Axial traverse ATB NF
10 t, peg Ø 55 mm, adjustment range 420 – 1020 mm | suitable for low-level buses | incl. 2 sliders and 2 adjustable receptacle pins
-
Axial traverse ATEB
10 t, peg Ø 55 mm
-
Axial traverse ATEB S2
7.5 – 15 t, peg Ø 45 mm
-
Axial traverse ATEB S2
7.5/15 t, peg Ø 45/55 mm, adjustment range 200 – 620/830 – 1500 mm | special cross bar for secure seating of EvoBus buses, in particular the CITARO series | incl. 4 pads and 2 sliders
-
Bus traverse BEFV-15
Wide, extended version with extendable sliding pieces, extra flat, adjustment range 870 – 1200 mm (510 – 840 mm), load capacity 15 t (center) | 1 piece
-
Bushing 55/35
Peg Ø 55 mm, standard peg Ø gearbox plates 35 mm | for BLITZlifts with mount Ø 55 mm | 1 piece
-
Bushing 55/45
Peg Ø 55 mm, standard peg Ø gearbox plates 45 mm | for BLITZlifts with mount Ø 55 mm | 1 piece
-
Bushing 80/35
Peg Ø 80 mm, standard peg Ø gearbox plates 35 mm | for BLITZlifts with mount Ø 80 mm | 1 piece
-
Bushing 80/45
Peg Ø 80 mm, standard peg Ø gearbox plates 45 mm | for BLITZlifts with mount Ø 80 mm | 1 piece
-
Calibration fee (net) for all tyre gauges Pneutruck
-
Cross-beam for ArtisLift MRG55
15 t
-
Diagnostic kit STDADIAG
IDC5 KIT TEXA – for diagnostic wheel alignment | kit for those who have a wheel alignment but no TEXA accessories
-
Diagnostic kit STDADIAG/SW
TEXA IDC5 SW KIT – for diagnostic wheel alignment | kit for those who already have TEXA devices (e.g., ADAS RCSS)
-
Fastening set ATS
30 t, peg Ø 55 mm | for positioning a traverse safely on the supporting bridge GS
-
Fastening set ATS
10 t, peg Ø 35 mm | for positioning a traverse safely on the supporting bridge GS
-
Floor stand
800 mm wide (for T/L-4 platform)
-
Floor stand
1000 mm wide (for T/L-5 platform)
-
Gearbox plate GA III
Adjustment angle +/- 40° / +/- 17°, load capacity 1 t, peg Ø 35 mm, measurements 400 x 300 mm (adjustable up to 600 x 400 mm), tensioning belt to secure the load
-
Gearbox plate GA IV
Adjustment angle +/- 12°, load capacity 1 t, peg Ø 35 mm, measurements 546 x 381 mm, in series galvanised, tensioning belts to secure the load, large rubber supporting surface
-
Lowered traverse
Can travel along the whole adjusting range at floor level
-
Lowered traverse
In defined position, fitted at floor level
-
Pad
Steel clamp | load capacity 17 t | 1 piece
-
Pad A 120
Support plate, pin | load capacity 15 t, peg Ø 75 mm, Ø 120 mm | with handles | 1 piece
-
Pad A 50
Support plate, pin | load capacity 15 t, peg Ø 75 mm, Ø 50 mm | 1 piece
-
Pad A 60
Support plate, pin | load capacity 15 t, peg Ø 75 mm, Ø 60 mm | 1 piece
-
Pad E 140/100
Support plate, aluminum pad, rectangular | load capacity 15 t, peg Ø 75 mm | 1 piece
-
Pad E 190/230
Support plate, aluminum pad, rectangular | load capacity 15 t, peg Ø 75 mm | for traverse TEF 107445 | 1 piece
-
Pad E 270/230
Support plate, aluminum pad, rectangular | load capacity 15 t, peg Ø 75 mm | for traverse TEFV 11132 | 1 piece
-
Pad G 145/150
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
-
Pad G 185/150
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
-
Pad G 220/110
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
-
Pad G 260/190
Supporting fork | load capacity 15 t, peg Ø 75 mm | for rear axles with differential | 1 piece
-
Pad G 30/80
Supporting fork | load capacity 15 t, peg Ø 75 mm | 1 piece
-
Pad G 40/150
Supporting fork, standard | load capacity 15 t, peg Ø 75 mm | 1 piece
-
Pad G 40/90
Supporting fork | load capacity 15 t, peg Ø 75 mm | for supporting low-floor buses (MAN and DB CITARO) at the front axle | 1 piece
-
Pad G 50/60
Supporting fork | load capacity 15 t, peg Ø 75 mm | 1 piece
-
Pad H
Wooden clamp | load capacity 15 t, peg Ø 35 mm | 1 piece
-
Pad H
Wooden clamp | load capacity 20 t, peg Ø 80 mm | 1 piece
-
Pad H
Wooden clamp | load capacity 20 t, peg Ø 55 mm | 1 piece
-
Pad P
Support plate, pin | load capacity 15 t, peg Ø 35 mm | special support for buses on frame (mushroom shaped support) | 1 piece
-
Pad P MAN
Support plate, pin | load capacity 15 t, peg Ø 35 mm | special support for MAN trucks at the rear axle (mushroom shaped support) | 1 piece
-
Pad R
Support plate, rubber pad, round | load capacity 15 t, peg Ø 55 mm | 1 piece
-
Pad R
Support plate, rubber pad, round | load capacity 15 t, peg Ø 35 mm | 1 piece
-
Pad R 116
Support plate, rubber pad, round | load capacity 15 t, peg Ø 75 mm, Ø 116 mm | 1 piece
-
Pad R 150
Support plate, rubber pad, round | load capacity 15 t, peg Ø 75 mm, Ø 150 mm | 1 piece
-
Pad U
Support plate, fork | load capacity 15 t, peg Ø 55 mm | 1 piece
-
Pad U
Support plate, fork | load capacity 15 t, peg Ø 35 mm | 1 piece
-
Pad U 145
Support plate, fork | load capacity 15 t, peg Ø 35 mm | 1 piece
-
Pad U 175
Support plate, fork | load capacity 15 t, peg Ø 35 mm | 1 piece
-
Pad U 220
Support plate, fork | load capacity 15 t, peg Ø 35 mm | 1 piece
-
Pad X
Steel clamp | load capacity 30 t, peg Ø 80 mm | 1 piece
-
Pad X
Steel clamp | load capacity 20 t, peg Ø 55 mm | 1 piece
-
Pad X
Steel clamp | load capacity 15 t, peg Ø 35 mm | 1 piece
-
Pit expansion BusStop
Abstract segment
-
Pit frame Type A
weight: 46 kg/m, a = 870 mm, per meter
-
Pit frame Type A
weight: 46 kg/m, a = 870 mm, per meter
-
Pit frame Type B
weight: 55Kg/m, a = 940 mm, per meter
-
Pit frame Type B
weight: 55 kg/m, a = 940 mm, per meter
-
Pit frame Type B1
weight: 42 kg/m, a = 940 mm, per meter
-
Pit frame Type B1
weight: 42 kg/m, a = 940 mm, per meter
-
Pit frame Type E
weight: 82 kg/m, a = 940 mm, per meter
-
Pit frame Type E
weight: 82 kg/m, a = 940 mm, per meter
-
Pit frame Type E1
weight: 69 kg/m, a = 940 mm, per meter
-
Pit frame Type E1
weight: 69 kg/m, a = 940 mm, per meter
-
Pit frame Type F
weight: 71.4 kg/m, a = 940 mm, per meter
-
Pit frame Type F
weight: 71.4 kg/m, a = 940 mm, per meter
-
Pit frame Type F1
weight: 62.5 kg/m, a = 940 mm, per meter, galvanised (both side)
-
Pit frame Type F1
weight: 62.5 kg/m, a = 940 mm, per meter, primecoated (both side)