Passenger cars
Showing 100–198 of 546 results
Supporting bridge SPZ-15
Pads
Mandrel | for Fiat Ducato, Peugeot Boxer, Citroën Jumper – front and rear | 1 set / 4 pieces
Pads
Support plate | for VW MEB platform E-vehicles | 1 set / 4 piece
Water drain/filter combination
Water separator, fitted in factory | to protect the control system and pump from harmful condensation | max. operating pressure 16 bar
Vehicle fuses
For turntable, Ø 120 mm | 1 set / 4 pieces
Support plate X
20 t, 55 mm peg diameter
Traverse ATEB S2
7.5 – 15 t, 55 mm peg diameter
Low-rise scissor lift XS30N-CAT
3.0 t, electrohydraulic
Pads
Support plate, rubber support, round | R, 15 t, Ø 55 mm
Spacer DS 1
Height 100 mm, capacity 15 t
Spacer DS 2
Height 200 mm, capacity 15 t
Spacer DS 3
15 t, 35 mm peg diameter
Support plate H
15 t, 35 mm peg diameter
Support plate P
15 t, 35 mm peg diameter
Support plate P MAN
15 t, 35 mm peg diameter
Support plate R
15 t, 35 mm peg diameter
Support plate U
15 t, 55 mm peg diameter
Support plate U
15 t, 35 mm peg diameter
Support plate U 145
15 t, 35 mm peg diameter
Support plate U 175
15 t, 35 mm peg diameter
Support plate U 220
15 t, 35 mm peg diameter
Support plate X
15 t, 35 mm peg diameter
Supporting bridge DB
Wooden blocks 100 x 200 x 360 mm, capacity 15 t
Traverse ATB
15 t, 55 mm peg diameter, standard traverse for buses
Traverse ATS
15 t, 55 mm peg diameter
Traverse ATEB S2
7.5 – 15 t, 45 mm peg diameter
Traverse ATS
20 t, 55 mm peg diameter
Spacer DR 5
Height 500 mm, capacity 15-30 t
Spacer DR 6
Height 600 mm, capacity 30 t
Support platform 15 t, mobile
Transportable support platform lowered under load, for use in conjunction with U-brackets, primed and lacquered
Supporting bridge GS
Universal, capacity 15 t, with Rollerset
Supporting bridge GSB
Extra flat, capacity 15 t, with Rollerset
Supporting bridge GSB Vario
Extra flat, capacity 15 t, with Rollerset
Supporting Package I
15 t, 55 mm peg diameter, navigable
Supporting Package II
15.5 t, 55 mm peg diameter, navigable
Supporting Package IV
15 t, 55 mm peg diameter, navigable
Traverse ATB MAN TGA-Set
15 t, 55 mm peg diameter
Traverse ATB Truck-Set
15 t, 55 mm peg diameter
Traverse ATK
15 t, 55 mm peg diameter
Diagnostic kit STDADIAG
IDC5 KIT TEXA – for diagnostic wheel alignment | kit for those who have a wheel alignment but no TEXA accessories
Diagnostic kit STDADIAG/SW
TEXA IDC5 SW KIT – for diagnostic wheel alignment | kit for those who already have TEXA devices (e.g., ADAS RCSS)
Supporting Package III
15 t, 55 mm peg diameter, navigable
Eyebolt
3.5 t – 4.2 t | facilitates installation of the lift, can be used again for other installations | 1 set
Inground cable connection kit
Allows columns connection cables to be placed inground | 1 piece
Crossbar height adjustment
Kit for increasing overhead cable passage height by up to +1.5 m | for spindle lifts | 1 set
Mounting set for traverse ATT 3,2 C | for cars / vans / MAN / Crafter / Sprinter
optional accessories for the transporter receptacle, recommended plug-in pick-up set
Spacer DS 1
Height 100 mm, capacity 30 t
Spacer DS 2
30 t, 80 mm peg diameter
Spacer DS 3
Height 250 mm, capacity 30 t
Supporting bridge VS
Connecting set, capacity 30 t
Wheel clamps Fast clamps
Quick-clamps | for CCD wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, clamps weight 3.8 kg (per set) | 1 set / 2 pieces
Spacers for pads
4 x 90 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | 1 set / 8 pieces
Spacer DS 2
Height 150 mm, capacity 30 t
Spacer DS 3
30 t, 55 mm peg diameter
Support plate H
20 t, 80 mm peg diameter
Support plate H
20 t, 55 mm peg diameter
Supporting bridge GS
Universal, capacity 20 t, with Rollerset
Supporting Package I
20 t, 55 mm peg diameter, navigable
Supporting Package I
20 t, 80 mm peg diameter, navigable
Supporting Package II
20 t, 55 mm peg diameter. navigable
Supporting Package II
20 t, 80 mm peg diameter, navigable
Supporting Package IV
20 t, 55 mm peg diameter, navigable
Supporting Package IV
20 t, 80 mm peg diameter, navigable
Traverse ATK
20 t, 55 mm peg diameter
Traverse ATK
20 t, 80 mm peg diameter
Transport trolley SmartCart XS | for Duplex load-carrying equipment
The convenient workshop helper with 33 slots – the attachments find their place in a tidy manner
Bus traverse BEFV-15
Wide, extended version with extendable sliding pieces, extra flat, adjustment range 870 – 1200 mm (510 – 840 mm), load capacity 15 t (center) | 1 piece
Truck traverse TEF-15 | Universal
1 piece, 1-fold telescopic, adjustment range 710 – 1040 mm (510 – 840 mm), load capacity 15 t (center)
Truck traverse TTS-15 | Double extension
1 piece, 2-fold telescopic, adjustment range 880 – 1500 mm (520 – 1140 mm), load capacity 15 t (center)
Wheel clamps Fast clamps
Quick-clamps | for 3D wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, clamps weight 3.5 kg (per set) | 1 set / 2 pieces
Traverse ATB NF
10 t, 55 mm peg diameter
Supporting bridge GS
Universal, capacity 10 t, with Rollerset
Supporting bridge GSB
Extra flat, capacity 10 t, with Rollerset
Supporting bridge VS
Connecting set, capacity 10 t
Supporting Package I
10 t, 55 mm peg diameter, navigable
Supporting Package II
11 t, 55 mm peg diameter, navigable
Supporting Package III
10 t, 55 mm peg diameter, navigable
Traverse ATB
10 t, 55 mm peg diameter
Traverse ATB Truck-Set
10 t, 35 mm peg diameter
Traverse ATH
Axle traverse telescopic
Traverse ATK
10 t, 55 mm peg diameter
Traverse ATS
10 t, 55 mm peg diameter
Traverse ATT 3,2
Axle traverse double telescopic
Traverse ATT 3.2 C
3.2 t, 55 mm peg diameter, 2x extendable
Traverse ZS 100
1 set (2 pieces) intermediate pieces for high vehicle pick-up points, incl. rubber plate, to be placed on the support plate when plug-in extensions can no longer be positioned, suitable for all car crossbars. Heights 50mm or 100mm, load capacity 1.5 t
Traverse ZS 50
1 set (2 pieces) intermediate pieces for high vehicle pick-up points, incl. rubber plate, to be placed on the support plate when plug-in extensions can no longer be positioned, suitable for all car crossbars. Heights 50mm or 100mm, load capacity 1.5 t
Gearbox plates GA passenger car
Load capacity 400 kg, universally applicable for passenger cars, particularly suitable for automatic transmissions
Pads
Support plate, rubber pad, adjustable – for quick-positioning on 4 heights | 4-stage | 1 set / 4 pieces
Supporting Package IV
10 t, 55 mm peg diameter, navigable
Lowered traverse
Can travel along the whole adjusting range at floor level
Lowered traverse
In defined position, fitted at floor level
Spacer D 100
Height 100 mm
Spacer D 200
Height 200 mm
Spacer D 60
Height 60 mm
Standard acceptance G 145/150
Standard acceptance G 185/150
Standard acceptance G 220/110
Standard acceptance G 260/190
for rear axles with differential
Standard acceptance G 30/80