Accessories for 2-post lifts will become your new support team to make your equipment even more efficient. You will find support kit, adaptators, and more.
Showing all 53 results

For base plate SPO3T | 1 set / 2 pieces

For base plate SPO/A40 | 1 set / 2 pieces

For 2-post lifts SGL35 | Grey (RAL 7040) | 1 set / 2 pieces


Only in conjunction with wheel clamp adapter 117571 | for SPO55E | 1 piece

Kit for increasing overhead cable passage height by up to +1.5 m | for spindle lifts | 1 set


1 set / 2 pieces

for easy positioning of the support arms under the vehicle (1 set / 4 pieces)

Compressed air connection and 230 V socket | 1 piece

3.5 t – 4.2 t | facilitates installation of the lift, can be used again for other installations | 1 set

5.5 t | facilitates the handling and installation of the lift, reusable for multiple installations | 1 set

Allows columns connection cables to be placed inground | 1 piece

For all lifts with 1-phase power supply

For all lifts with 3-phase power supply

For all the lifts with control unit in the upper part of the column (VARPH370.xx/T)

For lifts with capacity 2.7 – 3.2 t

Pads frame adapters kit Ø 120 mm (1 set, 2 pcs), for turntable

For SPOA3TS – not suitable for EV | 1 piece

For Fiat Ducato, Peugeot Boxer and Citroën Jumper | for quick drop-in of the K arms, Ø 45 mm | 1 set / 4 pieces

Set of pad extensions for 2-post lifts | 1 set / 4 pieces

For Fiat Ducato, Peugeot Boxer and Citroën Jumper | bushing Ø 45 mm | 1 set / 4 pieces

200 mm, bushing Ø 60 mm | 1 set / 4 pieces

For Fiat Ducato, Peugeot Boxer and Citroën Jumper | for quick drop-in of the K arms, Ø 45 mm | 1 set / 4 pieces

80 mm | for SPO65E | 1 set / 4 pieces

4 x 200 mm, incl. bracket for mounting on the pillars | 1 set / 4 pieces

4 x 89 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | 1 set / 8 pieces

1 set / 4 pieces

3.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces

4 / 4.2 / 4.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces

Plates to install baseless 2-post lifts on floor with poor capacity | Min. requirement: R’bk 200 withrnthickness 100 – 150 mm | 1 set / 2 pieces

Plates to install baseless 2-post lifts on floor with poor capacity | Min. requirement: R’bk 200 withrnthickness 100 – 150 mm | 1 set / 2 pieces

Plates to install baseless 2-post lifts on floor with poor capacity | Min. requirement: R’bk 200 withrnthickness 150 mm | 1 set / 2 pieces

250 mm | for SPO55 | 1 set / 4 pieces

For 2-post lifts | 1 set / 2 pieces

Magnetic | 1 set / 2 pieces


Ramp height 60 mm, for extremely low vehicles | 1 set / 2 pieces

4 x 1000 kg, wheel Ø 450 – 900 mm, only in conjunction with cross-connection adapter 126825 | for SPO55E | 1 set / 4 pieces

Complete, 4 x 1300 kg | for SPO65E | 1 set / 4 pieces


200 mm

Ergonomic holder for impact wrench

4 x 89 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | for SPOA40 | 1 set / 8 pieces

3.2 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces

5.5 t | allows installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces

4 x 90 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | 1 set / 8 pieces

For SPOA3TS-EH2-EV | 1 piece

Support plate, rubber pad, adjustable – for quick-positioning on 4 heights | 4-stage | 1 set / 4 pieces

Capacity reduced to 3.7 t | for LIK arms | 1 set / 2 pieces

Support plate, U-support | 1 set / 4 pieces

4 x 89 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | 1 set / 8 pieces

4 x 89 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | for AV arms | 1 set / 8 pieces