Accessories for workshop lifts can seriously make a difference. Our selection of accessories lifts includes kits, rubber pads, covers and much more.
Showing 1–99 of 466 results
To lift agricultural tractor | front and rear adapter
1 set / 2 pieces
For capacity 3000 / 4000 / 5500 (excluded N version) / 7000 / 8500 / 10000 kg
Cables between columns “m” meters longer than standard
For front/back base connection | necessary for lift installation
“m” meter, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
“m” meter, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
“m” meter, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
“m” meter, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
“m” meter, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
for easy positioning of the support arms under the vehicle (1 set / 4 pieces)
Floor installation kit for lifts | 1 set / 2 pieces
Floor installation kit for lifts | 1 set / 2 pieces
of the play detector on the lift
1 m | for surface installation
(1 set / 2 pieces)
5.5 t | allowing installation on floors with poor capacity or lower concrete thickness | 1 set / 2 pieces
2 x left / 2 x right, 1250 kg each | not compatible with AE-250
For surface installation of lifts
Abstract segment
weight: 46 kg/m, a = 870 mm, per meter
weight: 46 kg/m, a = 870 mm, per meter
weight: 55Kg/m, a = 940 mm, per meter
weight: 55 kg/m, a = 940 mm, per meter
weight: 42 kg/m, a = 940 mm, per meter
weight: 42 kg/m, a = 940 mm, per meter
weight: 82 kg/m, a = 940 mm, per meter
weight: 82 kg/m, a = 940 mm, per meter
weight: 69 kg/m, a = 940 mm, per meter
weight: 69 kg/m, a = 940 mm, per meter
weight: 71.4 kg/m, a = 940 mm, per meter
weight: 71.4 kg/m, a = 940 mm, per meter
weight: 62.5 kg/m, a = 940 mm, per meter
weight: 62.5 kg/m, a = 940 mm, per meter
driver side | 13,12 ft
driver side | 6,56 ft
driver side | 9,84 ft
passenger side | 13,12 ft
passenger side | 16,40 ft
passenger side | 6,56 ft
passenger side | 9,84 ft
40 mm | suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N6.193964, RAV.650N5.193902, RAV.660N2.193360, RAV.650N5.193018, RAV.650N6.193025, RAV.640N5.193049, RAV.640N4.192998, RAV.640N3.192981, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 4 pieces
200 mm | suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N6.193964, RAV.650N5.193902, RAV.660N2.193360, RAV.650N5.193018, RAV.650N6.193025, RAV.640N5.193049, RAV.640N4.192998, RAV.640N3.192981, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 4 pieces
20 mm | suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N6.193964, RAV.650N5.193902, RAV.660N2.193360, RAV.650N5.193018, RAV.650N6.193025, RAV.640N5.193049, RAV.640N4.192998, RAV.640N3.192981, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 4 pieces
120 mm | suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N2.193858, RAV.650N2.193520, RAV.650N2.193667, RAV.650N6.193964, RAV.650N5.193902, RAV.660N2.193360, RAV.650N5.193018, RAV.650N6.193025, RAV.640N5.193049, RAV.640N4.192998, RAV.640N3.192981, RAV.650N2.193384 and RAV.650N5.193919 | 1 set / 4 pieces
60 mm | suitable for RAV.640N1.193391, RAV.650N1.193742, RAV.650N6.193964, RAV.660N2.193360, RAV.650N6.193025, RAV.640N5.193049 and RAV.640N4.192998 | 1 set / 4 pieces
for monolithic constructed pits, per meter
To close turntable housing (As a replacement for turntables) | 1 set / 2 pieces
To close turntable housing (As a replacement for turntables) | 1 set / 2 pieces
To close turntable housing (As a replacement for turntables) | 1 set / 2 pieces
2 pieces, for Sprinter/Crafter, back
For vans and off-road vehicles | 1 set / 2 pieces
Extensions for adjustable fork (1 per column) | 1 set
Crossbar for standard lifts with adjustable fork
For scissor lift S38/S50
4 x 89 mm, 4 x 127 mm, incl. 2 brackets for mounting on the pillars | for SPOA3T | 1 set / 8 pieces
“m” meter, control unit left | mounting the operating unit in a special position – in drive-up direction “left” from the platform, at a distance of “m” meter | sold by the metre
“m” meter, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of “m” meter | sold by the metre
“m” meter, control unit left | mounting the operating unit in a special position – in drive-up direction “left” from the platform, at a distance of “m” meter | for lifts of the 800 series with floor compensation | sold by the metre
“m” meter, control unit left | mounting the operating unit in a special position – in drive-up direction “left” from the platform, at a distance of “m” meter | for lifts of the 800 series with floor compensation | sold by the metre
4 x 200 mm, incl. bracket for mounting on the pillars | 1 set / 4 pieces
10000 kg, 1235 – 2040 mm | Grey (RAL 7040)
10000 kg, 1235 – 2040 mm | with on springs retracting rollers
7500 kg, 1330 – 2030 mm | Grey (RAL 7040)
Compressed air connection under the track, 230 V socket at the control panel | 1 piece
Ideal for lifting motorhomes where the wheels are mounted behind the coachwork, incl. wheel forks and base frame extensions | load capacity is reduced to 4 t | 1 set (for 1 wheel gripper)
1 set / 4 pieces
Ramp height 60 mm, for extremely low vehicles | 1 set / 2 pieces
2 m, control unit left | mounting the operating unit in a special position – in drive-up direction “left” from the platform, at a distance of 2 m
2 m, control unit right | mounting the operating unit in a special position – in drive-up direction “right” from the platform, at a distance of 2 m
Ergonomic holder for impact wrench
Adjustment angle: ± 40° / ±17°, tensioning belt to secure the load, measurements adjustable to 600 x 400 mm, capacity 1 t, peg Ø 35 mm, measurements 400×300 mm
Adjustment angle= ± 12°, weight = 23 kg, large rubber supporting surface, tensioning belts to secure the load, comfortable tilting in all directions by fork spanner, extremely flat construction, in series galvanised, capacity 1 t, peg Ø 35 mm, measurements 530x380x120 mm
For all surface installation versions | 1 pair
For lifting various tractors, incl. various receiving means – agricultural receiving means for HydroLift, load capacity 16.4 t