Accessories diagnostic
Turn tables, tablets, wheel clamps, calibration targets, and camera system calibration: they are just some of the Rotary diagnostic accessories available.
Showing 100–198 of 253 results
-
Run-up ramps
For above-ground installation of plate brake tester RAVRT700PLT | 1 set / 4 pieces
-
Safety strings for STDA33EU-34E (standard) and STDA46EU-35E-95E
Accessory for wheel aligner | 1 set
-
Security system for vehicle detection
-
Serial cable 20 m
20 m
-
Software licence Test Lane Connect
Remote display on a mobile device | to use with on smartphones/tablets
-
Spare batteries for 3D aligners | 1 set / 2 pieces
-
Support kit blind spot cone | to be used in combination with item no. AD3908475 or AD3908476 and other similar articles
blind spot cone | to be used in combination with item no. AD3908475 or AD3908476 and other similar articles
-
Support panel for car calibration target for Honda (item no. AD3907338)
for car calibration target for Honda (item no. AD3907338)
-
Support platforms with presence sensor | 1 set / 2 pieces
with presence sensor | 1 set / 2 pieces
-
Support set for wheel free
-
Tablet (Android) including magnetic holder
-
Turn tables STDA124 | supplied instead of standard version | 1 set / 2 pieces
-
Universal remote control Bluetooth
-
Upgrade kit for converting RT094MVBX speed test stand to 2,3,4 wheel
For car motorbike 2-3-4 wheels – brakes + speed
-
Upgrade kit for digital consolle to use with a tablet
-
Walk-over covers | no transitable
-
Wall bracket for analog repeater
for analog repeater
-
Wall panels for measuring heads
(2 pieces.) with USB charging plug, access point and tablet tray
-
Weights and support for car mode calibration kit SRT066
+ weights support for calibration of pedal pressure gauge SRT064BTH (not needed if car brake tester calibration kit SRT087 is available)
-
Wheel clamps 3-point | rim Ø 8 – 24″ | 1 set / 2 pieces
3-point clamps with quick locking arms
-
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 760 mm
3-point clamps with quick locking arms | with Quick-Lock | 1 set / 2 pieces
-
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 910 mm
Self-centering 3-point clamps with quick locking arms | 2 sets / 4 pieces
-
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 910 mm
Self-centering 3-point clamps with quick locking arms | 2 sets / 4 pieces
-
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 910 mm
Self-centering 3-point clamps with quick locking arms for WD and WS models | 2 sets / 4 pieces
-
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 910 mm
Self-centering 3-point clamps with quick locking arms | 1 set / 2 pieces
-
Wheel clamps 4-point | rim Ø 10 – 24″, tyre Ø 480 to 910 mm
Self-centering 4-point clamps with quick locking arms | with Quick-Lock | 1 set / 2 pieces
-
Database query credit Shoot & Go 350
Credit package for consulting the online database via KBA (German Federal Bureau of Motor Vehicles and Drivers) query | 350 queries
-
Software licence Aligner Connect
Remote display on a mobile device | to use with on smartphones/tablets
-
Brake pedal depressor
-
Steering wheel lock
Plastic steering wheel lock with non-slip rubber guards for steering wheel and seat
-
Wi-Fi antenna
Wheelalignment-On, Wi-fi USB flash drive included
-
Advanced enabling of ADAS functions
-
Level and height gauge
Level and height gauge (option)
-
Access point kit to transmit to smartphones/tablets
WiFi access point | STDA141 required
-
Calibration tool Standard | for WS and WD series
Calibration kit, only for WS and WD series, replaces STDA14
-
Software licence
Remote display on a mobile device | to use with on smartphones/tablets
-
Diagnostic kit STDADIAG
IDC5 KIT TEXA – Diagnostic setup for those who have a wheel alignment but no TEXA accessories
-
Diagnostic kit STDADIAG/SW
TEXA IDC5 SW KIT – Diagnostic setup for those who already have TEXA devices (e.g., ADAS RCSS)
-
Lift mounting brackets for 3D measurement transducer | 1 set / 2 pieces
-
Turn tables Premium, HD | Ø 360 mm
1 set / 2 pieces
-
Adapter set to mount targets/measuring heads on a TEXA panel
Applicable if you already have a TEXA ADAS system
-
Turn tables Standard | Ø 300 mm, capacity 1000 kg | 1 set / 2 pieces
-
Claws for VW to be used with clamps with quick locking arms | ABS
Special wheel clamp plastic fingers | 1 set / 8 pieces
-
Magnets for clamp support | 1 set
-
Claws ABS, conic
Wheel clamp plastic fingers for wheel clamps STDA46EU-48E-35E-95E | 1 set / 8 pieces
-
Claws ABS, flat profile
Wheel clamp plastic fingers for wheel clamps STDA46EU-48E-35E-95E | 1 set / 8 pieces
-
Claws ABS, small profile
Wheel clamp plastic fingers for wheel clamps STDA46EU-48E-35E-95E | 1 set / 8 pieces
-
Claws for low profile tyres | Metal
Wheel clamp steel fingers for 4- or 3-point wheel clamps | 1 set / 8 pieces
-
Emergency power supply cable
For one measuring head / for WS series | 1 piece
-
Goniometers for truck turntables STDA29L
Graduated scales for wheel aligner | 1 set / 2 pieces
-
Kit for clamp support
For 3D wheel aligners ROT3D2.0WALL | Grey (RAL 7016)
-
Sliding plates 1100 x 500 x 50 mm
1 set / 2 pieces
-
Sliding plates 1500 x 500 x 50 mm
1 set / 2 pieces
-
Sliding plates 300 x 225 x 35 mm
1 set / 2 pieces
-
Spacers 200 mm
Mid-size | for truck wheel clamps STDA92 | 1 set / 6 pieces
-
Turntables for trucks | 1 set / 2 pieces
Capacity 2 x 4500 kg
-
Wheel clamps Truck | 3-point | tyre Ø 890 – 1290 mm
Special truck clamps with quick-locking arms to prevent wheel compensation, clamping on rim flange | 1 set / 2 pieces
-
Wheel clamps Truck | 4-point | rim Ø 12 – 28″, tyre Ø min. 700 mm
Self-centering 4-point clamps truck with quick-locking arms, movable shaft | including long removable claws | 1 set / 2 pieces
-
Аварийных кабеля
Аварийное электроснабжение и передача данных | для серии Bluetooth | 1 комплект / 2 шт.
-
Adapters for 3-point clamps for CCD wheel alignment on 2-post lifts | -120 mm
Allows to lower the measuring heads positioning thus prevents interferences on the transmission by the 2-post lift arms | 1 set / 4 pieces
-
Brackets for board installation ADAS (AUTEL)
Accessory for wheel aligner
-
Brackets for board installation ADAS (VAS6430 VW)
Accessory for wheel aligner
-
Clamps with quick locking arms for Porsche rims | Tyre Ø from 380 to 810 mm | 1 pair
Including blocking groups and 2+ 2 adapters
-
Subframe for trailer measurement
-
Trolley for wheel clamps
-
Wall brackets for wheel holders | 4 pieces
-
Wall panels for wheel holders | 2 pieces
-
Wheel clamps 4-point | rim Ø 12 – 28″
Self-centering 4-point clamps | including removable claws | 1 set / 2 pieces
-
Wheel clamps for BMW, Mercedes rims | tyre Ø 480 – 915 mm
Special clamps with quick locking arms for wheel aligner | 1 set / 2 pieces
-
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 910 mm
Self-centering 3-point clamps with quick locking arms | 1 set / 2 pieces
-
Wheel clamps Fast clamps
Quick-clamps | for CCD wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, max. wheel weight 3.8 kg | 1 set / 2 pieces
-
Grabber arms
For STDA35E-95E and locking groups STDA38 | long size| tyre-Ø 860 – 1115 mm | 1 set / 4 pieces
-
Grabber arms
For STDA35E-95E and locking groups STDA38 | medium size | tyre-Ø 680 – 910 mm | 1 set / 4 pieces
-
Token (password) KBA query
For consulting database on-line via query of German Federal Bureau of Motor Vehicles and Drivers (KBA) | includes 200 credits
-
Quick-locking arms for upgrading 4-point wheel clamps STDA30E | tyre Ø 780 – 1220 mm
To upgrade 4-point truck clamps STDA30E to STDA48E | including metal fingers | 1 set / 2 pieces
-
Quick-locking arms for upgrading 4-point wheel clamps STDA33EU-34E | tyre Ø 480 – 760 mm | 2 sets / 4 pieces
To upgrade wheel clamps STDA33EU-34E to STDA46EU-35E | allows to avoid run out compensation | including ABS fingers
-
Wheel clamps Truck | 4-point | rim Ø 12 – 28″, tyre Ø 780 – 1220 mm
4-point truck self-centering clamps with quick-locking arms, movable shaft | including metal grabbing armser | 1 set / 2 pieces
-
Spirit levels for targets | 1 set / 4 pieces
-
Token (password) for additional functions
-
Software subscription Texpack car driving assistance | Annual contract
Annual database update contract | including annual contract Gateway access “FCA SGW (TEXA)” (item no. STDAGSAFCA)
-
Vehicle data bank
-
Quick locking arms for upgrading 4-point wheel clamps STDA33EU-34E | tyre Ø 480 – 760 mm | 1 set / 2 pieces
To upgrade wheel clamps STDA33EU-34E to STDA46EU-35E | allows to avoid run out compensation | including ABS fingers
-
Turn tables Standard | Ø 300 mm | 1 set / 2 pieces
-
Wheel clamps Fast clamps
Quick-clamps | for 3D wheel aligners, passenger car, tyre size 21 – 31″, wheel Ø 540 – 780 mm, max. wheel weight 3.5 kg | 1 set / 2 pieces
-
Spare batteries for 3D aligners | 1 set / 2 pieces
-
Wheel clamps 3-point | rim Ø 8 – 24″, tyre Ø 480 to 910 mm
Self-centering 3-point clamps with quick locking arms, without compensation | 1 set / 2 pieces
-
Extra batteries | 1 set / 2 pieces
-
360° / rear camera calibration for Kia/Hyundai
(rear)
-
360° / rear camera calibration for Mazda
(360° camera)
-
360° / rear camera calibration for Mercedes Type 1
(rear)
-
360° / rear camera calibration for Mercedes Type 2
(rear)
-
360° / rear camera calibration for Mitsubishi
(rear)
-
360° / rear camera calibration for Nissan Qashqai
(rear)
-
360° / rear camera calibration for Nissan X-Trail
(rear)
-
360° / rear camera calibration for Opel Insignia
-
360° / rear camera calibration for SsangYong
(rear)
-
360° / rear camera calibration for Toyota, Lexus, Scion, Suzuki
(360° camera)
-
360° / rear camera calibration for VAG
(rear)
-
360° / rear camera calibration for VAG
(360° camera)